Why use Exoracing Push Lock Rubber Hose?
Here at Exoracing, we're dedicated to providing the best parts possible without sacrificing quality or safety—which is paramount when fuel lines are involved! Our range of push lock rubber hose is designed to withstand the rigours of motorsport.
Our push lock rubber hose is best suited to our range of push lock hose ends. The barbs on the push lock hose ends are designed specifically to allow the hose to be pushed on, but they add extra resistance once there is pressure in the lines, so removing them can be a bit challenging! Even though they are just a push on fitting, they can still operate with up to 250psi. The beauty of a push lock rubber hose is how universal it is!
One of the greatest features of the push lock rubber hose is how flexible it can be. You can bend this hose round a much tighter radius then you could with a braided hose, but just be careful to make sure there are no kinks, as that would stop the flow of the fluid you are transferring.
Our range of push lock rubber hose is a great solution for making different lines in your vehicle, from coolant, oil and even fuels with high ethanol content like E85 and E10.
We have used AN sizing for all of our push-lock rubber hoses and push-lock fittings, making it as simple as possible to choose the correct fitting for your application.
You can order our push lock rubber hose in uncut lengths of up to 20m! So, for example, if you order a quantity of 5, you will recieve 1 length of hose at 5 metres long.
Features:
- It can be used for coolant, oil, methanol, E85 and E10 fuels.
- Synthetic rubber.
- Must be used with Push Lock Hose Ends.
- Sized to be used with AN fittings.
- Supplied in uncut lengths up to 20m.
- Length 1.0m.
Exoracing Push Lock Hose Installation Notes
Installing a fitting onto your push-lock rubber hose may seem simple. However, as the tolerances are quite fine, the smaller sizes can be tricky.
It might be tempting to pick up that old pot of grease you have lying around. Although it will help with installation, different types of grease can eat away at the rubber, stop it from sealing correctly or get into the fluid and cause issues further down the line. There are specific approved water-soluble assembly lubes that can be used, such as Dixon P-80 emulsion assembly lube. Using such products will aid assembly and then dry without any adverse effects on your connection.
Specifications:
| Hose type | Minimum working temperature | Maximum working temperature | Maximum continuous pressure | Compatible hose end types |
|---|---|---|---|---|
| Reinforced Chlorinated Polyethylene (CPE) | -40 °c | 100 °c | 250psi | Push-Lock Hose ends |
Sizing:
| AN Size* | Hose ID | Hose OD |
|---|---|---|
| AN04 | 6.35mm | 11.94mm |
| AN06 | 9.65mm | 16mm |
| AN08 | 12.7mm | 19.05mm |
| AN10 | 16mm | 23.88mm |
| AN12 | 19.05mm | 25.4mm |
Notes:
- Professional installation is always recommended.
- The correct hose ends must be used to avoid leaks.
DESCRIPTION
Why use Exoracing Push Lock Rubber Hose?
Here at Exoracing, we're dedicated to providing the best parts possible without sacrificing quality or safety—which is paramount when fuel lines are involved! Our range of push lock rubber hose is designed to withstand the rigours of motorsport.
Our push lock rubber hose is best suited to our range of push lock hose ends. The barbs on the push lock hose ends are designed specifically to allow the hose to be pushed on, but they add extra resistance once there is pressure in the lines, so removing them can be a bit challenging! Even though they are just a push on fitting, they can still operate with up to 250psi. The beauty of a push lock rubber hose is how universal it is!
One of the greatest features of the push lock rubber hose is how flexible it can be. You can bend this hose round a much tighter radius then you could with a braided hose, but just be careful to make sure there are no kinks, as that would stop the flow of the fluid you are transferring.
Our range of push lock rubber hose is a great solution for making different lines in your vehicle, from coolant, oil and even fuels with high ethanol content like E85 and E10.
We have used AN sizing for all of our push-lock rubber hoses and push-lock fittings, making it as simple as possible to choose the correct fitting for your application.
You can order our push lock rubber hose in uncut lengths of up to 20m! So, for example, if you order a quantity of 5, you will recieve 1 length of hose at 5 metres long.
Features:
- It can be used for coolant, oil, methanol, E85 and E10 fuels.
- Synthetic rubber.
- Must be used with Push Lock Hose Ends.
- Sized to be used with AN fittings.
- Supplied in uncut lengths up to 20m.
- Length 1.0m.
Exoracing Push Lock Hose Installation Notes
Installing a fitting onto your push-lock rubber hose may seem simple. However, as the tolerances are quite fine, the smaller sizes can be tricky.
It might be tempting to pick up that old pot of grease you have lying around. Although it will help with installation, different types of grease can eat away at the rubber, stop it from sealing correctly or get into the fluid and cause issues further down the line. There are specific approved water-soluble assembly lubes that can be used, such as Dixon P-80 emulsion assembly lube. Using such products will aid assembly and then dry without any adverse effects on your connection.
Specifications:
| Hose type | Minimum working temperature | Maximum working temperature | Maximum continuous pressure | Compatible hose end types |
|---|---|---|---|---|
| Reinforced Chlorinated Polyethylene (CPE) | -40 °c | 100 °c | 250psi | Push-Lock Hose ends |
Sizing:
| AN Size* | Hose ID | Hose OD |
|---|---|---|
| AN04 | 6.35mm | 11.94mm |
| AN06 | 9.65mm | 16mm |
| AN08 | 12.7mm | 19.05mm |
| AN10 | 16mm | 23.88mm |
| AN12 | 19.05mm | 25.4mm |
Notes:
- Professional installation is always recommended.
- The correct hose ends must be used to avoid leaks.
Payment is accepted via Paypal or Credit/Debit card to be paid immediately upon purchase.
If you have any queries please dont hesitate to contact us!
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its product page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
If a tracked shipping service (e.g. DPD) is requested to be delivered to a location which cannot be signed for we cannot be held responsible or liable for goods going missing.
You may return most new, unopened items within 30 days of delivery for a full refund.
You should expect to receive your refund as soon as we receive the parcel from the return courier.
This time period includes the transit time for us to receive your return from the shipper, the time it takes us to process your return once we receive it, and the time it takes your bank or paypal to process our refund request.
If you need to return an item, please Contact Us with your order number and details about the product you would like to return.
We will respond quickly with instructions for how to return items from your order.
Exoracing was formed in mid-2018 to create a trustworthy brand and a company that can deliver high-quality parts at fair and affordable prices. We aim to cater to all automotive build levels, turning daily drivers into show cars to high-performance race applications. No build is too big or small for Exoracing to be involved.
Quality is a high priority here at Exoracing and has been since day one. We only source our products and materials from the best suppliers, also doing everything possible to keep our loyal customers' costs as low as possible. From our products to other brands we supply, we aim only to hold stock of products we would use ourselves!
We stock a massive range of brands such as Haltech, Hel performance, SuperPro, Competition Clutch, Soft99 and many more to give you a wide range of options. Thousands of products are stocked in our UK warehouse to ship out the same day.
We have manufactured our own range of products, such as our well-known heat management range renowned for high-performance turbocharged vehicles. We have an extensive range of gaskets and silicone hose kits to keep your car performing the best it possibly can. Finally, no car is complete without the personal touch of styling; our massive range of dress-up products adds flair to every corner of your vehicle.
We never stop working hard to improve the business and website in any way we can. From adding usability features on the website, such as "Shop by car", to searching for the best suppliers. We aim to provide a friendly yet professional service you can trust and rely on. Our excellent customer service staff are always available and will strive to answer any queries you have.
