Electric nasal aspirator with blackhead
2 Types:
(1)Electric nasal aspirator
(2)Electric nasal aspirator with blackhead
Product parameters
Material:Food Grade Silicone,ABS,PP
Power Supply:DC3.7V 700mAh
Working mode:Snot and black head
Suction Strength:65kPa
Screen:LCD backlight panel
Packing List:1*Host 3* Suction nose 1*USB 1*Working warehouse (Storage warehous+countercurrent cover) 1*User manual 1*Storage box
Function Description
1.Power/mode switching: long press for 3 seconds switching power supply
Short press to switch mode
Snorting mode
Blackhead mode
Long light when switching to blackhead mode
2.Suction adjustment: two modes of the machine, each with three gears
The first gear is the lowest suction, the third gear is the maximum.
Suction is adjusted by button cycle
3.Light: The default is off, press to open, then press to close
4.Music: The default is off, press to open, then press to closePrecautions for use
Do not put the body in water or other liquids
If there is a runny nose
Use a cotton swab to clean the main suction port
Please use the correct method of operation to prevent liquid from being drawn into the main unit.Precautions (Please read carefully before use)
The nozzle 1 is suitable for sucking deep dirt
The nozzle 2 is suitable for sucking shallow dirt
When using, keep the nozzle close to the nasal cavity, do not flow gaps
the outside air can not enter the nostrils to form a low pressure, it is easier to suck the nose
Please pay attention to the snivel storage bin during use. If there is too much snot
it may overflow into the suction port of the main unit. At this time,
please turn it off and clean it. Use a cotton swab to clean the suction port.
If the inhalation port has inhaled more nose,
please blow out the nose and blow it with a blower. Otherwise,
it may affect the normal use or even burn out the motherboard.
After use, please take off the work chamber and clean it.
It is strictly prohibited to wash with water after turning on the machine.
The body can not be waterproof.
The silicone nozzle can be placed in boiling water for disinfection.
Attebtion:Before screwing into the suction work chamber
Please check whether the sealing rubber ring of
The suction nozzle base is off. If it falls off
It will affect the suction function.
(blackhead suction bin assembly method:
If you purchased a blackhead assembly, please install it as follows)