100W Electric Non-Woven Fabric Cutting Hot Knife Tool with Cutting Foot
Description:
This heating cutter is a kind of convenient and practical cutting tool specially for cutting PVC rope, nylon, woven belt, etc. The fabric hot cutter is a wonderful tool with good cutting effect.
There is no rough edges after cutting. The heat cutter tool is power saving and easy to operate.
The temperature cutter blade can up to 600°C.
Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.
1.【Application】Cut the rope with diameter 2cm, and the webbing, with fine cutting edge, no disperse. Attached with the cutting foot, the hot knife cut the synthetic fiber cloth without backup under the cloth, seal the cutting edge as well; cut the seal line on the bag. Especially good for cutting sail cloth, awnings and filter cloth.
2.【Preparation】Insert each leg of the blade and tighten the knurled nuts. Make sure that the blade and the cutting head have optimal contact. If both legs of the blade are not properly installed, the unit will not heat up.
3.【Cutting】Avoid direct short circuit between cutting heads; Clean cutting heads with enclosed wire brush; Please make sure the blade is connected to the cutting material before blade heats up.
Specification:
Voltage: 110V/220V Power: 100W Power Cord Length: 3 Meters Intermittent Operation: 1/4min NOTE:
1. Always operate the hot knife in well ventilated space. 2. Never burn off the excess residue on the hot knife blade. The blades will over heated and be warped. 3. Only operate hot knife when it is in contact with the insulation board. 4. Keep hot blades away from skin, clothing and other flammable materials. 5. Allow blades to cool before handling. Hot knife may cause injury or burns to exposed surfaces. 6. If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the hot knife will operate again. Package includes:
1 x Hot Heating Knife Cutter 1 x Blade 1 x Little Wrench 1 x Cleaning Brush 1 x Plastic Storage Box NOTE: The color of the body may be different from the picture. This is due to different production batches. Please don't mind. Thank you for your understanding.
Warranty
Payment
Shipping
Customer Service
|