Why Use An Exoracing Quick Release Dry Break Fitting?

If you are serious about motorsports or work on your car frequently, then it's probably time you invested in some quick-release dry-break fittings.

Removing a fuel or oil line in seconds with no mess is invaluable. This can help you remove turbos, oil coolers, and fuel rails much faster than conventional methods. Removing hardware from your car quickly can help when you're against the clock in the pits.

Having a leak-free place to disconnect lines is also priceless regarding clean-up time and fluid cross-contamination.

The quick-release dry break fittings are rated to hold up to 2450PSI (check the specification table at the bottom). The outside of the fitting is made from 6061-T6 aluminium alloy, while the middle is made from Grade 303 Stainless Steel and equipped with a Viton O-ring, which will ensure no fuel or oil leaks are possible.

These are a great option for fuel systems where you don't have to build fuel pressure again after removing a line or an oil cooler if the system is full of oil. This method allows you to disconnect, swap out the part in the middle, and reinstall without any leakage or bleeding necessary.

We also now offer an Exoracing limited lifetime warranty against manufacturing defects on our range of quick-release dry break fittings. We are confident in our products and want to offer a risk-free buying experience.

Purchase Includes:

  • 1 x Quick Release Dry Break Fitting
  • 1 x Exoracing Limited Lifetime Warranty

Features:

  • The Exterior is machined from 6061 Aluminium
  • The interior is machined from 303 stainless steel
  • Quick release system for fast removal and installation
  • Perfect for fuel, oil and coolant systems
  • Available from AN04 to AN12
  • Compatible with most fuels and oils
  • Stops flow when disconnected from both ends
  • Exoracing limited lifetime warranty

Technical Specifications:

Exterior Material: 6061-T6 Aluminium Alloy
Interior Material: Grade 303 Stainless Steel
Fitting Type: Quick Release Dry Break
An Sizing Available: AN04-AN12
Shut Off System: Double Dry Break
O-Ring Material: FKM/FPM (Viton)
Fluid Compatibility: Petrol, Diesel, High Octane Fuel, Ethanol, Biodiesel, Engine and Gear Oil
Finish: Anodised
Warranty: Exoracing Limited Lifetime Warranty

AN Sizing: 

AN Size Max Operating Pressure Flow Diameter Cross Section
AN04 2450 psi / 168 bar 7/32" / 5.55mm 0.037 in2 / 23.87 mm2
AN06 1250 psi / 86.18 bar 5/16" / 7.937mm 0.083 in2 / 53.55 mm2
AN08 1250 psi / 86.18 bar 5/16" / 7.937mm 0.083 in2 / 53.55 mm2
AN10 800 psi / 55.16 bar 1/2" / 12.7mm 0.2 in2 / 129 mm2
AN12 800 psi / 55.16 bar 1/2" / 12.7mm 0.2 in2 / 129 mm2

Notes:

  • Professional installation is always recommended.
  • Our quick-release dry break fittings are designed for offroad use only.
  • Please double-check that you are ordering the correct size for your application.
  • Do not use with brake fluid or braking systems.
AN Quick Release Disconnect Dry Break Fuel Fitting

DESCRIPTION

Why Use An Exoracing Quick Release Dry Break Fitting?

If you are serious about motorsports or work on your car frequently, then it's probably time you invested in some quick-release dry-break fittings.

Removing a fuel or oil line in seconds with no mess is invaluable. This can help you remove turbos, oil coolers, and fuel rails much faster than conventional methods. Removing hardware from your car quickly can help when you're against the clock in the pits.

Having a leak-free place to disconnect lines is also priceless regarding clean-up time and fluid cross-contamination.

The quick-release dry break fittings are rated to hold up to 2450PSI (check the specification table at the bottom). The outside of the fitting is made from 6061-T6 aluminium alloy, while the middle is made from Grade 303 Stainless Steel and equipped with a Viton O-ring, which will ensure no fuel or oil leaks are possible.

These are a great option for fuel systems where you don't have to build fuel pressure again after removing a line or an oil cooler if the system is full of oil. This method allows you to disconnect, swap out the part in the middle, and reinstall without any leakage or bleeding necessary.

We also now offer an Exoracing limited lifetime warranty against manufacturing defects on our range of quick-release dry break fittings. We are confident in our products and want to offer a risk-free buying experience.

Purchase Includes:

  • 1 x Quick Release Dry Break Fitting
  • 1 x Exoracing Limited Lifetime Warranty

Features:

  • The Exterior is machined from 6061 Aluminium
  • The interior is machined from 303 stainless steel
  • Quick release system for fast removal and installation
  • Perfect for fuel, oil and coolant systems
  • Available from AN04 to AN12
  • Compatible with most fuels and oils
  • Stops flow when disconnected from both ends
  • Exoracing limited lifetime warranty

Technical Specifications:

Exterior Material: 6061-T6 Aluminium Alloy
Interior Material: Grade 303 Stainless Steel
Fitting Type: Quick Release Dry Break
An Sizing Available: AN04-AN12
Shut Off System: Double Dry Break
O-Ring Material: FKM/FPM (Viton)
Fluid Compatibility: Petrol, Diesel, High Octane Fuel, Ethanol, Biodiesel, Engine and Gear Oil
Finish: Anodised
Warranty: Exoracing Limited Lifetime Warranty

AN Sizing: 

AN Size Max Operating Pressure Flow Diameter Cross Section
AN04 2450 psi / 168 bar 7/32" / 5.55mm 0.037 in2 / 23.87 mm2
AN06 1250 psi / 86.18 bar 5/16" / 7.937mm 0.083 in2 / 53.55 mm2
AN08 1250 psi / 86.18 bar 5/16" / 7.937mm 0.083 in2 / 53.55 mm2
AN10 800 psi / 55.16 bar 1/2" / 12.7mm 0.2 in2 / 129 mm2
AN12 800 psi / 55.16 bar 1/2" / 12.7mm 0.2 in2 / 129 mm2

Notes:

  • Professional installation is always recommended.
  • Our quick-release dry break fittings are designed for offroad use only.
  • Please double-check that you are ordering the correct size for your application.
  • Do not use with brake fluid or braking systems.

Payment is accepted via Paypal or Credit/Debit card to be paid immediately upon purchase.


If you have any queries please dont hesitate to contact us!

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.


When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.


Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its product page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

If a tracked shipping service (e.g. DPD) is requested to be delivered to a location which cannot be signed for we cannot be held responsible or liable for goods going missing.

You may return most new, unopened items within 30 days of delivery for a full refund.

You should expect to receive your refund as soon as we receive the parcel from the return courier.

This time period includes the transit time for us to receive your return from the shipper, the time it takes us to process your return once we receive it, and the time it takes your bank or paypal to process our refund request.

If you need to return an item, please Contact Us with your order number and details about the product you would like to return.
We will respond quickly with instructions for how to return items from your order.

Welcome to Exoracing, specialists in Japanese performance and modification parts.

Exoracing was formed in mid-2018 to create a trustworthy brand and a company that can deliver high-quality parts at fair and affordable prices. We aim to cater to all automotive build levels, turning daily drivers into show cars to high-performance race applications. No build is too big or small for Exoracing to be involved.

Quality is a high priority here at Exoracing and has been since day one. We only source our products and materials from the best suppliers, also doing everything possible to keep our loyal customers' costs as low as possible. From our products to other brands we supply, we aim only to hold stock of products we would use ourselves!

We stock a massive range of brands such as Haltech, Hel performance, SuperPro, Competition Clutch, Soft99 and many more to give you a wide range of options. Thousands of products are stocked in our UK warehouse to ship out the same day.

We have manufactured our own range of products, such as our well-known heat management range renowned for high-performance turbocharged vehicles. We have an extensive range of gaskets and silicone hose kits to keep your car performing the best it possibly can. Finally, no car is complete without the personal touch of styling; our massive range of dress-up products adds flair to every corner of your vehicle.

We never stop working hard to improve the business and website in any way we can. From adding usability features on the website, such as "Shop by car", to searching for the best suppliers. We aim to provide a friendly yet professional service you can trust and rely on. Our excellent customer service staff are always available and will strive to answer any queries you have.