Universal Motorcycle Speedometer Tachometer Tacho Water Temp Speed Gauge Odo RPM KMH MPH LCD Digital Backlight Backlit

Specifications

  • Condition: 100% new
  • Color: Black
  • Size: As picture shows
  • Terminal: 9 Pin+6 Pin+3 Pin+2 Hole
  • Backlight: Blue
  • Item included: 1 x Set of Motorcycle Speedometer
  • This Is Aftermarket Replacement Item But Not Genuine

  • Note:

    1) All dimensions are measured by hand, there may be small deviations.

    2) Color may vary slightly due to the color setting of each individual monitor.

    4) RPM does not compatible with Electric fule Injection (EFI) engine.

Description

Product Dimension:

Feature:

1) According to the original factory specifications.

2) Universal fit for all motorcycles with DC 12V, adjustable for 8-22 inch wheel.

3) Multifunction ALL-IN-ONE: Speedometer, Odometer, Tachometer, Fuel Level Display, Left and Right Indicator, N Gear, Battery, Water Temperature Indicator.

4) Fits all style motorcycle ,1 cylinder, 2 cylinder and 4 cylinder( 4 stroke motorcycle disc-brake front tire ).

5) Shift speed display in kilometers or miles.

6) Particular Attention: RPM does not compatible with Electric fule Injection (EFI) engine.

Skills requirement:

1) The instrument working power is DC12V.

2) Metric system switching: Press and hold the SET button, the vehicle speed will flash. At this time, press the ADJ button to modify it. If there is no operation for 15 seconds, it will automatically exit and take effect. You can also press it twice to exit and take effect.

3) LCD display, TOTAL maximum 99999.9, TRIP maximum 99.9. Short press SET button, TOTAL and TRIP switch; in TRIP, long press ADJ button for 4 seconds, TRIP clear. Press and hold the ADJ button to power up, TOTAL minus 200, can be operated 3 times.

4) Change the oil prompt: every 2000km oil lamp is on, prompt to change the oil, when the oil lamp is on, switch to TOTAL, press and hold the ADJ button for 4 seconds, the oil lamp is off.

5) Clock: 12-hour system, long press the SET button, the vehicle speed flashes, press the SET button once-once, the clock flashes, then press the SET button shortly-once, the clock minute flashes. When flashing, short press the ADJ button to modify, no operation for 15 seconds, automatically exit and take effect. You can also press the SET button to exit and take effect. 6. Background setting: You can set the speed of the vehicle, the number of cylinders, the two-wire/three-wire sensor, and then press and hold the SET button, then open the door. The LCD will jump from 0 to 9 and then jump to the setting interface. The default display is 018 1 2. Position, engine fault light, water temperature light negative control; left and right turn signal, high beam, positive control.

DataCaciques