Technical
Specifications:
AC Input Voltage
Maximum Voltage: 264Vac
Normal Voltage : 100~240Vac
Minimum Voltage: 90Vac
AC Input Frequency
Maximum Frequency: 63Hz
Normal Frequency: 50~60Hz
Minimum Frequency: 47Hz
Input Current:
1.2A (Max.) @ 115Vac input will
full load
0.6A (Max.) @ 230Vac input will
full load
-
DC Output Power: 5A (60W) Continuous, 70W Peak
-
High efficiency design with 88% minimum at normal
line input and average of 25%, 50%, 75%, 100% of max
load. Meet CEC level VI
-
No load Power Consumption : Less then 0.21W
-
Inrush Current (cold start) : 30A Max.
@110Vac/60Hz; 60A Max. @230Vac/50Hz
-
AC Leakage Current: 0.25mA Max. @240VAC input.
-
Line Regulation: This line regulation is less than ±
5%, of rated output voltage@ full load
-
Minimum Load: 0.0A
-
Hold Up Time: ≧ 5mSec., @ 115V AC input line, with
full load.
-
Rise Time: ≦40 milli-second @ 115V AC input with
full load - from 10% to 90% of output voltage.
-
Turn on Delay Time: The output voltage should rise
to 90% of rated output voltage in less than 3 second
from 115V AC applied to start up.
-
Over voltage protection
-
Short circuit protection
-
Over Voltage Protection
-
100% HI-POT tested: IEC 320 3pin primary to
secondary 1800Vac 5mA 1min
-
100% cycling BURN-IN under 80% load for 2 hours
-
12V DC output @ +- 5% Standard Deviation
-
120mV Maximum Ripple Voltage
-
Operating temperature: 0 - 50 degree C
-
Storage temperature: -20 - 80 degree C
-
Humidity : Operating - 10 to 90 %;
Storage - 5 to 90 %
-
Altitude : Operating - From sea level to
2,000-Meter ; Storage - 5,000-Meter
-
MTBF : > 50,000 hours at full load under 25
degree C ambient condition
Standard US 3-pong AC Inlet
- IEC 320 3pin (Type C14)
compatible
- UL Safe 3-prong AC
power cord compatible
- Ground pin included for extra
safety over 2-prong design
Built-in power status indicator
- Blue
LED turns steady on when there is a reliable 12V
DC output.
- LED flashes when there is a problem
found by the internal detection circuitry.
- LED turns off when there is no
power output or no power input.
DC cable: 20AWG, 1200mm total length
Safety compliance: UL,
cUL, TUV, CE, FCC, CCC, KC, GS, CB, DOE VI, cTick, SAA
Dimensions: 110 (L) * 45 (W) * 26
(H) mm
RoHS Compliant - made with
hazardous-free components
RoHS is the Restriction Of the use of certain
Hazardous Substances in electrical and electronic
equipment. This has been a standard in Europe and is
now becoming a standard in the world. Not only lead,
but cadium, mercury, hexavalent chromium,
polybrominated biphenyl (PBB), and polybrominated
diphenyl ether (PBDE) flame retardants are limited as
well.
Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE