Durable Steel Plates
This
desk frame is made up of high-strength steel plates, which is thick,
sturdy, and lasts for a longer time. It is non-break & stable.
Strong Dual Motors
It is equipped with two powerful motors at each side, which will lift or down the desk legs smoothly and quietly.
Convenient Digital Controller
Offer
a smart control center behind the tabletop. Real-time desk height can
be displayed with a LED screen. The four preset heights and memory
function are provided.
Three-sections:
Two-sections:
Technical Specifications
Input: 220-230VAC
Output Power: 24VDC
Load Capacity:1000N
Max.Speed: 15MM/S
Stroke:480MM
Min.Install Dimension:700MM
Load:100KGS
Operation Temperature: 0-40℃
Duty Cycle:Max.10% or 2 min.on and 18 min.off
Size: high/low limit of this frame is 23.4"-49" (height),41.1"-53.7" (Width)
this frame is two section adjustable
This frame include dual motor
the maximum Load is 800N
Direction for Use
1. Correctly connect the Control Box,Handset,Power Wire,Lifting Column, Patch Cord.(Picture 1).
2.
Plug the power cord into 110~230VAC outlet:The Digital Tube will
display “PON” for seconds it means electrified successfully,need to
reset.
After reset the Digital Tube will display 23(MM),reset finished.
RESET:
Press and hold the down button, after 5 seconds the desk will begin
tolower, until to the lowest height then slightly rise.Reset finished.
Release the down button.
3. After reset,press and hold “UP” button,lifting column will rise,release to Stop.
4. After reset,press and hold “DOWN” button,lifting column will fall,release to Stop.
5. How to memory:
After pressing and holding UP/DOWN button to a height,press button S
first,then press button 1,this height will be remembered by button
1.Still pressing and holding UP/DOWN button to another height,press
button S,then press button 2,this height will be remembered by button 2.
The same way,the button 3,4 can remember other heights.
After memory,press 1/2/3/4 button,desk will motion to the height it
remembers,press “UP” and “DOWN” button.The motion will bestopped.
Notice
1.This product must be used under the correct technical parameters.
2.Keep away from liquids,corrosive gases,dusty environment.
3.Contact our factory when necessary.
Application scenario:
Package details: