B1.jpeg
Discover the World of Short Wave Radio with 10D Extended Version Receiver
DESCRIPTION


Features:

-DSP Receiver

Version: V1.10D (latest version)

-3.5 inch capacitive touch screen

- via USB cable

- Standard frequency range: 50KHz-200MHz 4MHz -2GHz - Demodulation

Modes: AM, SSB, NFM, WFM analog modulation


V1.10 D added the following features in 1.10 C:

(1.10d, 1.10c, 1.10b, 1.10a)

1. Cancel the function of short pressing the audio encoder to exit the menu. The original functions in the menu interface are not affected. You can still adjust parameters like volume or change items. The menu can only be exited with a short press on the frequency encoder.

2. In the menu interface, use the frequency encoder to adjust the project parameters.

3. Menu setting, increase and decrease electromagnetic interference control (EMI reduction) / WF gamma mode setting (WF gamma)

4. The PCB adopts a 4-layer board structure with superior performance.

5. Shell, double shield, better shielding effect.

6. Screen optimization, replacement of touch chip, more sensitive touch

7. Using mature cavity dual-diaphragm speakers, the sound effect is better.

8. Battery circuit optimization, no standby power consumption, longer battery life

9. Use high-quality crystal oscillators to improve performance.

10. Improve the charging circuit to solve the problem that the battery cannot be charged and do not turn on


Product parameters:

1) The radio is based on the principle of : the function is determined by the loaded software;

2) Frequency range from 50KHz to 200MH and 400MHz to 2GHz;

3) All types of analog modulation: AM SSB (LSB USB) NFM WFM;

4) Powerful functions: variable filter width, adaptive noise canceller, threshold noise canceller, noise canceller, AGC, equalizer;

5) Use the full-featured msi001 chip;

6) The powerful stm32h743 with a clock frequency of 480MHz is applied;

7) 3.5-inch IPS touch screen;

8) Has built-in UHF;

9) Controls: 2; buttons and touch screen encoder;

10) Powered by external USB-C interface (Huawei mobile phone) or battery (including 2500mah battery), it can be charged through USB-C.

11) Consumption: 300MA when listening to headphones;

12) Built-in or external antenna reception was developed to improve the high frequency reception of the antenna and an additional source tracking board was developed. This board will be integrated into standard receiver designs.

13) Connect the computer via USB, which can transmit CAT, CI and audio.

14) 160 kHz, with scalability;

15) Sensitivity: s/w is 0.3μv=10dB up to 250MHz; the above measurements were not performed due to lack of measurement equipment;

16) Due to the characteristics of the msi001 chip used, the dynamic locking range is around 85dB.

17) With backlight control;

18) SMA female antenna socket;


The package contains:

1*Host

1*type-c charging cable

1*Antenna Adapter

1*SMA to M socket (SMA male to UHF female)


POLICES

 

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 



We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.


 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.



DataCaciques