220V 2.4G AC Triac Rotary Panel Dimmer Knob Dimming LED Controller 360W for Lamp
Rotary dimming/Leading edge or trailing edge/Min brightness settable/Wireless remote control Model No.: KS ● Rotar y panel AC phase-cut dimmer, 1 channel output. ● To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights. ● Rotate knob to change brightness, support push and long push operation. ● Leading edge dimming or trailing edge dimming set by dip switch. ● Min brightness can be set by key. ● Light on/off fade time 3s selectable. ● Compatibility with RF 2.4G dimming remote control . ● Over-heat / Over-load protection, recover automatically. Technical Parameters Input voltage： AC100-240V output voltage： AC100-240V Output current: Max 1.5A Output power: 150-360W Input signal: Rotary knob + RF 2.4GHz RF Control distance: 10m(Barrier-free space). EMC standard (EMC): ETSI EN 301 489-1 V2.2.3; ETSI EN 301 489-17 V3.2.4 Safety standard(LVD): EN 62368-1:2020+A11:2020 Radio Equipment(RED): ETSI EN 300 328 V2.2.2 Certication: CE,EMC,LVD,RED Size: L112x W112 x H60mm |
 |
Knob function ● Push: Turn on or off light. After turn on light: ● Rotate: Rotate knob to adjust brightness, 2.5 turns, 50 levels. ● Long push(1-5s): Continuous 256 levels brightness adjustment. |
 |
Min brightness setting Long press Min set key for 2s, the light blink 2 times, ready for min brightness set, then short press Min set key 1-6 times, to get 6 min brightness: 5%, 10%, 15%, 20%, 25% or 30%, the light will output the current min brightness immediately, Long press Min set key for 2s or wait 8s, quit min brightness set, the light will output 100% brightness automatically. Light on/off fade time Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s. |
 |
Leading edge or trailing edge dimming setting Select leading edge(forward-phase) dimmer or trailing edge(reverse-phase) dimmer according to dimmable LED light or driver Caution: before power on, you must confirm the selection of dip switch. |
 |
 |
 |
 |
 |
 |
 |
 |
Match Remote Control (three match ways) The AC triac rotar y panel dimmer can also match with the RF dimming remote (optional). End user can choose the suitable match/delete ways. Three options are offered for selection: Use Match key Match: Short press match key, immediately press on/off key(single zone remote) or zone key(multiple zone remote) of the remote. Delete: Press and hold match key for 5s to delete all match. Use Knob Match: Turn on light, turn off, immediately push the knob for 5s, immediately press on/off key(single zone remote) or zone key(multiple zone remote) of the remote. Delete: Turn on light, turn off, immediately push the knob for 10s, delete all matched remotes. Use Power Restart Match: Switch off the power, then switch on power, repeat again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. Delete: Switch off the power, then switch on power, repeat again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted |
 |
A
