Description
Note: When DIY lamps, be sure not to remove the reflective film near the lamp beads Use a knife to cut off the reflective film in other parts, because teaching off the reflective film will cause the lamp beads to fall off during use.
We have several different switch configurations for you to choose from, the differences between different styles are as follows:
1. CR2032: Promotional model, requires a CR2032 battery installation and use (switch on the battery box).
2. 7 #AAA: Two AAA batteries are required for installation and use (switch on the battery box).
3. Touch Switch AAA: requires two AAA batteries to install and use, touch the button.
The light piece of the switch that touches the button is only suitable for masks made of plastic, acrylic, cardboard and other non-conductive materials.
Not suitable for metal masks.
It cannot be used when mounted on a metal mask.
The sensing distance of the touch switch is about 1-5MM, so the thickness of the mask helmet is within 5MM.
If the thickness exceeds this thickness, the switch cannot be sensed.
(Solutions that cannot be used normally: The position of the touch switch is controlled within 5MM, or a small hole is opened on the mask to install the touch switch, and then the touch switch is painted with color.)
4. Remote Control Sensing: The use of 2 x AAA batteries & Button battery CR2025 x 1 (batteries, please bring your own), with battery box, with switch, When not in use for a long time, please turn off the battery box switch, as standby mode will consume battery energy. Using a new infrared sensor module, includes a small remote control, Pressing ON will turn on the light, OFF turns off the lights, (Note that the remote control does not include batteries, you can go to the convenience store to buy button batteries: CR2025 x 1).
Infrared remote control requires unobstructed control within a certain distance.
Product features: Lens material is flexible and bendable It can be cut to the desired size with scissors and is suitable for most cosplay helmets If you need other customized sizes of lenses, please contact us. This product is made of high tech flexible materials, which have flexible quality and can be bent It can be cut with a wallpaper knife to better fit the eye area of the helmet and achieve better results.
1.Product flexible material, the back has a white reflection point, through the emission point to let the light spread to achieve the luminous effect.
Make sure that the white reflection point is inside the mask when mounting (the smooth side of the light plate is mounted outwards).
2.Handmade, the details can vary.
Input voltage 3V, if the input voltage is too high, please install your own resistor to reduce the voltage.
Avoid lamp bead damage.
3.Due to the different external light, the brightness of the light will also be affected, and the luminous effect is better in the case of dark light.
Where the light is low, the brightness diffuses better.
Where the light is strong, the brightness will be reduced a lot (or even feel no light), which is the principle of light diffusion, not a quality problem, I hope to understand.
Condition: 100% brand new
Size: Product Size is about 64MM, Effective Luminous Size Approximately 58MM.
This product does not contain batteries You will need to purchase battery power to install and use it.
Suitable for Star Lord decorations with better eye effects, cosplay mask helmets, etc. Please check if the size of the product fits your helmets.
DIY products need to be assembled after purchase We only provide LED lights (excluding batteries) The project does not include other items such as mask helmets Please understand that .
Thank you!