The top of the unit can be tumed 360 degrees to both left and right while it is forbidden to remove.Insert the top of the unit into the main unit in rotation mode.
When the battery needs to be charged, connect the plug of the adapter into the ac 100v-240vpower supply. Then connect the output plug of the adapter to the dc V input jacket of the charger, then put the main unit into the charger and connect it to the charger station terminal.
If the battery is low power, the display screen will show the word"Lo", it means that the device need to be charged.
The device is not provded sterile and is not intended to be sterilized when used. To prevent cross contamination, users must cover the devce with FDA cleared barrier sheath before use. It should be changed between each patient.
Turbo Mode: screen show P1. Press the P/T button to select of time which could be 1 and 3seconds.
Normal Mode: screen show P2. Press the P/T button to select of time which could be 5, 10. 15 and 20 seconds.
Ramp Mode: screen shows P3. Press the P/T button to select of time which could be 10. 15. and 20 seconds.
During the operation, aim the top of the main nit, at the correct position, press the ONOFF button and the main unit wil l produce sound, the curing light radiates blue light and starts working according to the set modes meanwhile. It starts counting down and wil produce Bi"at every 5 seconds, it stops working when counting down to 0.
During operation, the blue light can be stopped )y press the power button at any time.
After a working cycle, operator can press the ON/OFF switch to start another working cycle. sop operating if the equipment began to heat obviously, do not restart until the equipment cod down.
Suggest continues working cycle less than 10 times.
Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time.
When te battery needs to be charged, connect the plug of the adapter into the ac 100V-240V power supply. Ten conect the output plug of the adapter to the DC 50V input plug of he harger station, and then the logo turned to blue. Put the main unit to the charging point of the charge station, the display screen tumed to scrolling display, and the curing lights starts charging.
This equipment will tum off automatically if there is no any action within 2 minutes, You can tum t on by press any button.
The depth of solidification of composite is no less than 2mm per 1 second.
5. Clean and Disinfection
In order to prevent cross-infection, its commended to do following process before and after each operation.
Turn off the deice and take the main unit form the charger.
Take off the cover sleeve after operation.
Wipe the main unit with a soft cloth moistened with purified water.
Dry the device naturally.
6.Daily maintenance
This equipment does not include the sef-maintainable spare parts.
The maintenance of this equipment should be taken by the appointed professional or special repair shop.
User can change lithium battery,.Please use accessory which is designed and supplied by our company,contract with the local dealer or our company if you want to buy.It may cause potential dangers to curing light or other damages which is designed and supplied by other manufactures.
The accessory of the product should be cleaned by clean water or neutral sterilized liquid Do not soak.Do not use highly latile and diffluent solvent to clean this equipment, which can cause the signs on the control panel to fade.
Please clean the resin remained on the top of the main unit after using to avoid infecting the life-span or solidified effect.
The device cannot be maintained during operation, and it is suggested to maintain it once a month.
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name: dentalwhitesmile0915
Shipping from City, State: Rancho Cucamonga, California,
Shipping Information: Most items will be posted out the same day from California, if the payment is received before 3:00 PM (PST) | We ship MONDAY-FRIDAY (Except Holidays).
Returns Information: We accept returns within 30 days of receiving the item. Please contact us immediately, prior to leaving feedback so that we can help resolve any issues in a timely manner, to the best of our ability. Return Item/s must be received in the same packaging with ALL Original Contents and Labels that were included.