Description

Origin Effects Revival DRIVE uses analog circuitry to mimic the signal path of a tube amp in its pedal-sized housing, creating a drive that can range from the clean tones of British or American amps to fully turned drive knobs. This is an overdrive pedal that delivers.
Built-in mid-boost and a variety of unique controls on both the valve and silicon channels allow you to create the ideal drive sound for any type of amp situation. Revival DRIVE is the answer to the drive pedal you've always wanted.

It's no exaggeration to say that there hasn't been a single pedal to date that can achieve the drive sound of a vintage valve amp without a master volume. At Origin Effects, we have been developing Revival DRIVE by focusing solely on amplifiers, without referring to other drive pedals. What we were aiming for was the sound of a vintage valve amp.
We listened to the sounds of countless classic amps and sought to find out what makes them sound good. The result is Revival DRIVE, which is the ultimate drive pedal that not only reproduces the sound of a specific amp under certain conditions, but can also bring back the sound of a classic amp through any setup or signal path. I did. In addition to reproducing classic tones, Revival DRIVE is packed with various tone control elements, so the drive sound can freely change its expression depending on the player's sensibilities, creating completely new tones. You can even do it.

Real Amp Tones From Real Amp Circuit Behavior
With the Cali76 compressor, we recreated the sound and response of the legendary Urei 1176 studio compressor in pedal form, following the same analog circuit topology. We approached the development of the Revival DRIVE using exactly the same approach as the Cali76 compressor.
Revival DRIVE's components are all analog, vacuum tubes replaced with discrete transistor circuits, and every aspect of the signal path of a vintage valve amp is recreated in tone and behavior. Revival DRIVE is a reproduction of amplifier tone that includes not only preamps, phase inverters, power amplifiers, and rectification methods, but also changes in sound due to power supply and speaker cabinet resistance. Revival DRIVE was born as a result of deep research into amplifiers. .

Design Your Dream Overdriven Amp Tone
Emulating the behavior of a tube amplifier circuit is just the beginning of Revival DRIVE. By freely manipulating the intuitive control system, you will be able to fuse the amp and Revival DRIVE according to your own sensibilities and discover new sounds.
Try changing the Revival DRIVE's BRIGHT-CAP value at the same time as setting the tone of your amp. Adds dimension to British or American amp tones. If you moderate the low end, you'll get a sophisticated drive sound, and if you set it to emphasize the bass, you'll get a roaring distortion. You can also precisely control the increase or decrease in response sensitivity of the overdrive, which responds sharply to the dynamics of picking. Stand out from the crowd with a mid-boost with individually adjustable level and frequency. If you want to take advantage of the nuances of the original sound, use the BLEND control to control the ratio of DRY and WET signals.

True Amp-Like Playing Feel
Revival DRIVE's unique circuit design allows it to faithfully reproduce the behavior of a vacuum tube amplifier, something that cannot be achieved with existing pedal effects.
Two channels are available, a valve channel and a silicon channel, which are variations that imitate different rectification methods, and also reproduce the subtle differences in feel of an amplifier caused by voltage drop. Adds an airy feel to lead lines by adding a subtle yet magical effect called ghosting, such as double tones and ghost tones that can be heard when a vintage amp is fully distorted. , can be emphasized.
Two class A preamp stages provide the realistic gain stage and unnatural clipping characteristics of a real amp, while a phase inverter and push-pull power amp stage provide realistic tone, symmetrical overtones, and fine cross-over. It creates a drive character that responds sharply to overdistortion and how you play.
A built-in reactive load models the interaction between a real vacuum tube output stage and speaker cabinet, as well as realistic overtones.

The Ultimate Fly-Rig Overdrive
Revival DRIVE is equipped with an EQ adjustment function that can be used with any amplifier. You'll probably be able to create a satisfying sound even with a flat-response power amp.
Pedal effect designers often tune their favorite amps. If you end up using that pedal with a different style amp, you're out of luck. You may have to settle for a harsh or muddy sound, or you may have to sacrifice your preferred clean tone settings to match the drive sound.
There are no compromises with Revival DRIVE.
The optional front panel filter control on the CUSTOM model allows you to create even deeper sounds by adjusting the shelving characteristics, cutoff frequency, and boost/cut of the second EQ.

Unrivaled Features, Amazing Flexibility
Revival DREIVE is packed with a number of original features, and has been completed as a genuine overdrive pedal that can be used in any situation, showing various faces depending on the player's sensibilities.
By operating the DIP switch on the back of the panel, you can swap the valve channel with a second silicon channel, or switch between British-style or American-style power supply simulation to subtly change the pitch of the ghost tone. Also, when connecting Revival DRIVE's output signal directly to a flat-response power amplifier or PA console, you can create preamp-style sounds by bypassing the overdrive effect and activating only tone shaping.
The separately sold foot switch supports mid-boost function and blend control on/off switching, improving the usability of Revival DRIVE and expanding its range of activities.

Specification
・Designed and built in England
・Power supply: 120mA@9V center negative
・Weight: 1200g
・Size: 160 x 117 x 59 mm
・Option: Footswitch sold separately (Revival Footswitch)

Payment

Please pay within 4 days after purchase.

Shipping

Please refer to Shipping and handling.

About other area, please ask me.

Returns

Returns are accepted ONLY if the item was not the item described.

International Buyers - Please Note: 

* Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. 
* Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.