Feature:
D52-2048 type rail type digital display multi-function meter is to display the measured AC voltage, AC current, active power, apparent power and power factor at the same time on the instrument.
Applicable to all power distribution equipment meters (such as power distribution cabinets/household distribution boxes/home appliance repairs, etc. Especially at home (DZ47/C45/air switch) The main line is installed and changed to the instrument, which can monitor the use of home appliances in real time.

Specification:
1. Measurement accuracy: 1%±2 digit
2. Display: voltage and current display 4 red 0.31 inch LED digital tube, active power, apparent power and power factor 5 bit red 0.31 inch LED digital tube.
3. Measuring range: AC voltage: 200-450V
4. AC current: AC0-100.0A, when the measured current is less than 100A, the current display resolution is 0.01A, when the current is greater than 100A, the current resolution is 0.1A, and the range is automatically converted (the decimal point is automatically shifted)
5. Active power: AC200-450V: 45000W
6. Measurement speed: about 2 times per second
7. Dimensions: 54 (length) * 80 (width/height) * 64 (thickness) mm
8. Installation width: =3P (DZ47/C45, air switch position)
9.The size of the protruding part of the instrument: 54 (length) *45* (width/height) *16 (thickness/depth) mm
10. Installation method: rail type
11. Built-in transformer: the wire of the measuring circuit passes through the round hole on the right side of the meter (the round hole diameter 11MM can pass through the maximum 12 square (mm) standard copper wire / can meet the load maximum current 100A) Note: The load passes through the round hole of the meter Pass from above or below without affecting current measurement accuracy
12. External transformer (hole diameter 15.5mm) can meet the national standard 21-25 square (mm) standard copper wire through

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3mm measuring deviation due to manual measurement.