Bartoline Creocote Oil Based Timber Treatment (Creosote Substitute) Dark Brown ALL SIZES
Bartoline Creocote is a non-Biocidal oil based wood treatment, effective when applied to exterior timbers such as garden sheds, fences and trellis work. The oil based properties provides excellent surface water repellence, restricts weather damage and improves grain definition. Smells just like traditional Creosote.
Coverage: Depending upon the texture and porosity of the timber to be treated, application of a single coat of Bartoline Creocote will cover at the rate of 1 litre per 6 to 8m².
Shade: Light Brown and Dark Brown
Size: 4 Litre or 20 Litre
++++ Also Available on this listing is an Application Brush: The Supadec Shed and Fence Application Brush is ideal for applying Creocote or Timber Treatment to rough timber. Bristle and polyester mix for added durability. Size: 100mm / 4"
Cleaning:
Water based paints: Rinse in clean water
Oil/Solvent based paint: Rinse in white spirit or thinning solvent (if different). Then wash in warm water with detergent.++++
Usage Instructions:
PREPARATION:
Ensure that all timbers are structurally sound, dry and free from surface growths.
Care should be taken to protect valuable plants and foliage during application.
Children and pets should be kept away from treated timbers until they are completely dry.
Timbers previously treated with Creosote, Creosote Substitute or a solvent based wood preservative will readily accept re-treatment with Bartoline Creocote.
Sealed or painted timbers must be stripped back to bare wood before coating with this product.
The shade may vary from batch to batch and it is therefore recommended that containers with the same batch number are selected to ensure shade uniformity. Alternatively, premix different batches.
The final shade is dependant upon the timber being treated and the previous covering applied.
The colour will fade with time.
To ensure suitability it is recommended that test patches are applied before general application.
APPLICATION:
Bartoline Creocote can be applied by brush, spray or dip methods.
A deeper colour may be attained by applying further treatments.
Apply liberally, soaking the timber to achieve best results.
Always ensure that end-grain timbers are fully saturated.
For timbers being set in the ground, apply Bartoline Bitumen Paint to protect against groundwater saturation.
AFTER CARE:
Clean all tools and application equipment with White Spirit.