PLEASE READ THE FOLLOWING CAREFULLY BERFORE ORDER:
|
1. Please make sure that the LCD screen/panel can still work normally. You can install the screen/panel on the original notebook or monitor for testing. If it fails to display normally, the screen/panel has been damaged. Please do not place orders to avoid unnecessary disputes.
2. We will install the firmware program for free according to the LCD screen/panel model you ordered. So make sure the screen model you ordered is the same as your actual screen model. Otherwise the controller board may be incompatible.
3. If your LCD screen/panel model is not in our sales list, please leave a message with us via eBay. Or send us photo of the screen model label to help confirm. (The model label can be found on the back of the screen)
4. If you concern much about resolution setting, please reconsider before bidding! DIY need certain professional knowledge. If you have any questions during the operation, please contact us for assistance.
5. Because we need to choose the right kit for your LCD screen/panel, and the supplier may upgrade or update the product, some accessories may differ from the picture. Please refer to the actual product received.
6. This kit is only work for 1366*768 resolution, LVDS 40-Pin (1 ch, 6-bit) signal port, 60Hz LCD screen.
Compatible with the following screen models:
B133XTN01.0 | LP133WH1(TL)(A1) |
B133XTN01.5 | LP133WH1(TL)(A2) |
B133XW01 V.0 | LP133WH1(TL)(B1) |
B133XW01 V.1 | LP133WH1(TL)(C1) |
B133XW01 V.2 | LP133WH1(TL)(D1) |
B133XW01 V.3 | LP133WH1(TL)(D2) |
B133XW02 V.0 | LP133WH2(TL)(A1) |
B133XW02 V.1 | LP133WH2(TL)(A2) |
B133XW03 V.0 | LP133WH2(TL)(A3) |
B133XW03 V.1 | LP133WH2(TL)(A4) |
B133XW03 V.2 | LP133WH2(TL)(C2) |
B133XW03 V.3 | LP133WH2(TL)(E1) |
B133XW03 V.5 | LP133WH2(TL)(F1) |
B133XW07 V.1 | LP133WH2(TL)(F2) |
B133XW07 V.2 | LP133WH2(TL)(GA) |
CLAA133WA01 | LP133WH2(TL)(HA) |
CLAA133WA01A | LP133WH2(TL)(L3) |
CLAA133WB01A | LP133WH2(TL)(M4) |
LT133EE09100 | LP133WH2(TL)(N4) |
LT133EE09300 | LTN133AT17-305 |
LT133EE10000 | LTN133AT17-701 |
LT133EE10300 | LTN133AT17-L01 |
N133B6-L01 | LTN133AT23-001 |
N133B6-L02 | LTN133AT23-801 |
N133BGE-L31 | LTN133AT23-803 |
N133BGE-L41 | LTN133AT27-202 |
N133BGE-LA1 | LTN133AT28-L01 |
N133BGE-LB1 | M133NWN1 R0 |
If your screen model is not in the list or you cannot confirm compatibility, Please contact us first to confirm.
Controller Board Features:
Work power supply: DC 12V 3A (DC Port: 1.35MM and 3.5MM inner+ outside-), or connect the DC 5V 2A phone charger via Micro USB.
Come In Standby Mode When Not Input Signal (Standby Mode <0.3W)
Input: 2 mini HDMI
Output: Earphone, PH1.25 4-pin small speaker (optional)
OSD: Brightness Contrast VOL+ VOL- Language And So On
Language: English, Chinese
EDP signal cable length: 250mm
Board Size: 82mm*60mm
The kit includes the following accessories:
1X Controller board
1X LVDS signal cable
1X Keypad with cable
Special Note: In addition to the kit list accessories, You also need to prepare the Mini HDMI conversion cable and power supply yourself.
Controller board kit installation steps:
1. Take away the old screen cable from the LCD panel.
2. Connect the new screen cable to your LCD panel. (Note the connector contact direction)
3. Connect the controller board to the computer with Mini HDMI signal cable.
4. Input power DC 12V 3A. or Micro USB 5V 2A mobile phone charger.
5. After all finishing the connecting, please do not rush to power on! No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.
Please refer to the photo below to insert the metal contact point of the cable plug upwards into the screen.
Language Modify:
1. Use the Keyboard "MENU" button to enter the setup menu.
2. Press the "UP"/"DOWN" button to select the fourth item "OSD". Then press the "MENU" button to confirm the selection.
3. Press the "MENU" button in the first "Language Selection" to confirm the selection. Then press the "UP"/"DOWN" button to select language that you need. Press the "ENTER" button again to confirm and exit.
Please refer to the photos below.
We can only accept the payment method recognized by the platform.
Please pay in time after ordering, the earlier you pay, the sooner you receive your item.
If you can't pay it within 5 days, we view you give up.
Package will be shipped within 1-3 business days of your payment verification (not include weekend&holidays ).
Before payment, please make sure that your shipping information is correct. Once the package is sent, it cannot be modified.
International Buyers Please Note:
As a buyer, it is your duty to pay the tax when you make a order from abroad. Our price does not include taxes, VAT, or other hidden charges. Please consult the
customs of your country or region before placing an order to determine these additional charges.
Refund or replacement request is available only the requests within 1 week after parcel received&returning the item as the same condition as received.
If the item is found non-defective, the item will be sent back to the buyer. Buyer is responsible for All Return Postage and Shipping Charges.
If you need it urgent, please contact us for the special delivery with extra postage.
If you received and like this item, please leave us positive feedback , this is very important for us, we also will leave you positive feedback.
If you have any disatisfaction, please do not leave us negative/neutral feedback, please contact/write to us first, giving us a chance to fix problem, we would
like to resolve your question asap to let you satisfy, simple negative feedback cannot solve any question, I think the communication is very important to understand
each other and is the best bridge for us. Thank you very much.