eBay

Thanks for choosing RC Engine Bearings USA (cbr10006zu2)

Many thanks to our new and regular customers, we've been on Ebay over 23 years.

We do combined Shipping and send you a refund as soon as we do your orders.

If you don't see your Engine listed email me I have sets for most engines.

PLEASE CHECK FITMENT GUIDE BELOW

We only sell Premium Grade ABEC3 or better upgrade Hi Speed Bearings and for only a couple dollars more than the common unknown spec or abec1 rated low grade soft metals general use Bearings, our Premium Bearings are all correct C3 Clearance for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings, Not the old leaky shield type. We get our Bearings from proven reliable US Bearing Suppliers. We have Fast US Shipping from USA.

INTERNATIONAL SHIPPING Discontinued until problems with pricing and shipping are resolved.

(Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)

I'm VeriSign and PayPal Verified . I've been on Ebay 23 + PayPal's Money Back Guarantee.

I've rebuilt over 800 Model Engines if you need Help just email me.

Fitment guide for this set

((( 6001Open EMQ ))) ID 12mm x OD 28mm x Width 8mm Dimensions

((( 608 2RS EMQ))) ID 8mm x OD 22mm x Width 7mm Dimensions

((( 695 ))) 5x13x4 zz

MAGNUM POWER XL 52 RFS

OS 56 FS A 4 Stroke

OS ENGINES FL 70 4 STROKE ENGINE

OS ENGINES FS-4C SURPASS 52

OS ENGINES FS72-A 72

The listing is for (4) NEW PREMIUM EMQ BEARINGS.

You are buying (1) SET (4) Premium BEARINGS with installation Instructions .

If you don't see your engine listed email me, I have sets for most engines.

(1) REAR USBBEMQ ABEC3/C3 HC Chromium Deep Groove high speed Full Metal Cage open bearing (Note) if you want all sealed email before paying. Most engines use open rear bearings.

(1) FRONT HCEMQ Premium ABEC3/C3 Deep Groove high speed Full Metal Cage HC Chromium Steel Sealed with Mobil high temp Grease (Options/Seals (2) , Open or Seal on One Side) Ships Sealed (2) Seals.

(2) CAM Bearings ZZ Premium

Bearing Type & Specs

(1) Rear USBB EMQ Chromium Steel High Speed ABEC3/C3 Deep Groove Premium Bearing

Type Premium ABEC3/3 Open (sealed on request)

Bearing Material: HC Chromium

Enclosure Open (sealed on request)

RPM Oil (x1000): 30

(1) Front Premium ABEC/C3 HCHEMQ Chromium High RPM , can be run open or sealed on 1 side or both, Ships Sealed.

Seals	Buna True Rubber Seals
Lubrication	Mobil Polyrex Wide temperature range (-40 to + 350)
Noise Testing	Noise tested before and after lubrication
Noise Level	Passes V2 Noise Vibration Standards Smaller Sized, V3 Standards.
Precision Balls	HC Chromium Matched ABMA Grade 10 or better for roundness
Raceways	Finely honed Super Finished for long life and low noise
Quality Level	Premium bearings ABEC 3/C3

Endurance Bearing Testing

Independent Endurance testing has verified our Premium Bearings Outperformed all low cost bearings and matched or exceeded the performance of well-known brand name bearings.

Thanks again to all our regular and new Customers for our 5 Star seller.com Rating.

Engine BEARING Care and storage info.

Why pay $30 or 40 dollars for low grade or no grade factory bulk bearings that don't last long compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings, get some spares if you leave fuel in your engine they will need replaced after they gum up or turn into a ball of rust, you can save buying a new engine by replacing gummy or rusted, stuck, rough or loose bearings before they come apart and damage the piston, head and sleeve. Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance. I always remove the fuel line and idle the engine dry, then put in marvel mystery oil or after run oil and spin it over, for long tern add liberal amounts of After Run Oil and cap off carb and exhaust, if the engine sets for a long time Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning, then when started the crank spins in the inner bearing race, not good.
cbr10006zu2 RC Engine Bearings