Feature:

1. 1.27 Inch: This RGB display module adopts 1.27 inch with the resolution of 128x96 and 262K colors that can clearly display colour pictures.
2. SPI Interface: This 1.27 Inch RGB module supports 8bit 8080 parallel, 8bit 6800 parallel, 3wire SPI and 4wire SPI and other communication modes.
3. SSD1351 Driver Chip: This RGB screen module is designed with SSD1351 driver chip which ensures more stable performance.
4. Less Required IO Pins: This 1.27in RGB module adopts 4wire SPI and 3wire SPI as communication modes to reduce the area of the module and minimizes required IO pins.
5. Back Resistor: This 1.27 inch module has a resistor at the back, which can be selected to be soldered, through which the communication mode can be selected.

Specification:

Item Type: 1.27 Inch RGB  Module
Material: Printed Circuit Board, Glass
Operating Voltage: 3.3V/5V
Resolution: 128x96
Communication Interface: 3/4 Wire SPI
Display Size: Approx. 25.708 x 19.28mm / 1.01 x 0.76in
PX Size: Approx. 0.047 x 0.185mm
Control Chip: SSD1351
Display Color: 262K Colors (Maximum)
RST: Reset, Low Active
DC: Data/Command, High for Data, Low for Command
CS: Chip Selection, Low Active
CLK: Clock Signal Input
DIN: Data Input
GND: Ground
VCC: Power Positive (3.3V / 5V Power Input)

Package List:

1 x 1.27 Inch RGB  Module

1 x Cable

Note:

Ensure that the power supply voltage is consistent with the logical voltage, otherwise, the system cannot work properly