3/4" High Carbon Steel NPT Pipe Tap Extractors and 1/2" Broken Water Pipe Extractor,Home Water Pipe Repair Kit Broken Pipe Extractor Broken Shower Arm Extractor

About National Pipe Taper (NPT) Taps
1. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
2. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
3. NPT threads require the use of a “sealer” like teflon tape or pipe compound.

Specification:
100% brand new and high quality
Name: Pipe Screw Extractor
Material: Carbon Steel
Quantity: 4pcs
4': fit for pipe DN15= 1/2inch=7# (11-18MM)
6': fit for pipe DN20= 3/4inch=8# (16-23MM)
Drill bit size: 4' 6' Pipe Screw Extractor, for 1/2 inch, 3/4 inch and other large diameter pipes
Square Shank According to DIN 10
The square head is designed to hold the ratchet wrench and multi-function wrench for easy force.
Extracts screws and bolts
Durable hardened steel construction
Universal, Fast, Convenient, Disassemble screws
Remove Damaged Screws Bolts and Water Pipe Extractor set

How to Use:
1. Pick a head of the extractor corresponding to the water pipe and insert it into the water pipe
2. Use the wrench to turn the extractor counterclockwise into the water pipe , and the water pipe will spin out due to eating the thread
3. Check if the broken screws are all removed.

Package includes:
4 * Pipe Screw Extractor
1 * Pipe Seal Tape
1 * Special Wrench

- Your Professional Tool House
Professional Remover Repair Tools - Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads,for repairing broken water pipes, Water tap, Triangle valve, Pipeline
Two Sets of Different Sizes - Shower arm thread remover sizes includes:1/2"-14 NPT, 3/4"-14 NPT Water Pipe Extractor(1/2 pipe extractor,3/4 pipe extractor), allowing you to easily repair water pipes
Repair Size - The size of a pipe extractor set is that of the pipe fitting to be tapped, not the actual size of the tap. 1/2" corresponds to pipe ID is 0.43"-0.7", 3/4" to pipe ID is 0.63"-0.9"
Tap Extractors - Round shank with square end. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction,well suited for shallow cuts
Thread Sealant Tape - Holds in temperatures from -212F to 500F. For use in wrapping pipe threads to create air and water tight connections, for Shower Heads, Sprinklers, Pipe