Bluetooth Option Board für
ReVox B760 Tuner

Das Bluetooth-Modul wird einfach in den werkseitig vorhandenen Steckplatz eingesteckt. Der vorhandene Dummy-Plug (Blindeinsatz) muss zuvor aus dem Steckplatz herausgezogen werden. Das Bluetooth-Modul wird entweder mit dem NOISE REDUCTION Schalter zur Kopplung aktiviert, oder ist immer zur Kopplung sichtbar, sobald der Netzschalter eingeschalten wird.

Dies kann mittels umstecken eines Jumpers durch den Käufer konfiguriert werden. Es ist keine externe Antenne verbaut, daher ist eine sichere Bluetooth-Verbindung nur bis ca. 2 Meter möglich. 
Eine externe Antenne kann angeschlossen werden, diese ist jedoch in diesem Angebot nicht enthalten.

Diese Option kann jederzeit wieder entfernt, und der Tuner in den Originalzustand zurückversetzt werden. 

Zur Audioausgabe muss der NOISE REDUCTION Schalter eingeschalten werden. Der Bluetooth-Betrieb wird durch aufleuchten der blauen Leuchtanzeige signalisiert (vorausgesetzt das Leuchtmittel ist intakt).

Der Einbau des Adapter ist in der B760 Betriebsanleitung beschrieben. Das kleine interne Deckblech darf aber nicht mehr eingesetzt werden, da sich sonst der Bluetooth-Empfang verschlechtert.

Der auf dem ersten Foto dargestellte B760 Tuner dient nur Veranschaulichung der Funktion.

Lieferumfang:
  • Bluetooth Modul Board (Einsteckplatine) für ReVox Tuner B760 und Receiver B739/B780
  • Bedienungsanleitung
  • kostenloser Versand innerhalb Deutschlands
Bitte wählen Sie die von Ihnen gewünschte Versandart bei der Kaufabwicklung. Folgende Versandoptionen sind möglich:
  • Hermes Päckchen 4,50 €
  • Deutsche Post (PRIO Maxi-Brief) 3,85 €

Privatverkauf | keine Gewährleistung | keine Rücknahme

______________________________________________

Bluetooth Option Board for
ReVox B760 Tuner

The Bluetooth module is simply plugged into the slot provided at the factory. The existing dummy plug must be pulled out of the slot beforehand. The Bluetooth module is either activated for pairing with the NOISE REDUCTION switch or is always visible for pairing as soon as the power switch is turned on.

This can be configured by the buyer by changing a jumper. There is no external antenna built in, so a secure Bluetooth connection is only possible up to about 2 meters. 
An external antenna can be connected, but it is not included in this offer.

This option can be removed at any time, and the tuner can be returned to its original state. 

For audio output, the NOISE REDUCTION switch must be turned on. Bluetooth operation is signaled by the blue light indicator lighting up (provided the light bulb is intact).

The installation of the adapter is described in the B760 operating manual. However, the small internal cover plate must not be inserted, otherwise the Bluetooth reception will deteriorate.

The B760 tuner shown on the first photo is only for illustration of the function.

Scope of delivery:
    • Bluetooth module board (plug-in board) for ReVox Tuner B760 and Receiver B739/B780
    • Instruction manual

    International bidders are welcome - please ask for shipping cost to your destination. 
    After purchase wait for the Ebay invoice - the correct shipping costs are listed there. 
    DHL International to:  GB / GB-NIR / CH  27.- € 


    Private sale | no return | no warranty