(see precautions) and Acids, dilute

Alcohols, Gasohol

Aliphatic solvents, Aromatic solvents, Chlorinated solvents

Ammonia, liquid

Caustics, concentrated

(see precautions)

Compressed air, Steam, Water

Cutting oils

Diesel fuel oil

Ethylene glycol, Glycerine

Fatty acids

Heating oils, Kerosene

Hydraulic fluids, Hydraulic oils

Hydrogen, gaseous and liquid, Inert gases, gaseous and liquid

Jet fuel

Ketones, Petroleum solvents

Liquid Petroleum Gas, Natural gas

Mineral oils, Vegetable oils

Nitrogen, gaseous and liquid

Soap, liquid

Specifications

Composition: 99.6% PTFE < 0.4%

Pigment Color: Blue

Length: 1429″

Thickness: 0.0035″ +/- 10%

Density: 0.8g/cm3

Elongation: >100%

Tensile Strength: 15N / mm2

Pressure rating: Mill-Rose Blue Monster Thread Sealing Tape has been used to seal fittings carrying water and oil at pressures up to 10,000 PSI or 69,000kPa

Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.

Temperature Range: -450°F to +500°F (-268°C to +260°C) PTFE is completely stable up to +500o F or +260°C. Decomposition is slow up to 750°F or 400°C. Although decomposition will occur on contact with naked flames.

Fittings above 1½” (38mm) diameter.

Use 3/4″ (19mm) wide tape for fittings up to 2″ (51mm) in diameter. Use 1″ (25mm) wide tape for fittings larger than 2″ (51mm) in diameter.

Follow the directions under “Instructions”.

Precautions

Note: Keep Mill-Rose Blue Monster Thread Sealing Tape clean. Replace the clip on the spool after use. Store in a clean place. PTFE is virtually chemically resistant to all media, however there are a few exceptions. Alkali metals such as elemental sodium, potassium and lithium are to be avoided. These alkali metals remove fluorine from the polymer molecule. Extremely potent oxidizers such as fluorine (F2) and related compounds (e.g., chlorine trifluoride(CIF3) can be handled by PTFE, but only with great care. Since fluorine is absorbed into the resin, the mixture becomes sensitive to a source of ignition such as impact. Other media to avoid are 80% NaOH or KOH, metal hydrides such as boranes (e.g., B2H6), aluminum chloride, ammonia (NH3), certain amines (R-NH2), imines (R-NH) and 70% nitric acid at temperatures near the suggested service level.

Do not use Mill-Rose Blue Monster Thread Sealing Tape on oxygen lines!

Mill-Rose recommends Green Oxygen Tape for oxygen lines. For further safety details consult the Material Safety Data Sheet.

Limited Liability

The information presented is in good faith, but no warranty is given nor are the results guaranteed. Since we have no control over the physical conditions surrounding the application of information herein contained, Mill-Rose disclaims any liability for untoward results.

A new, thicker, professional-grade density

Monstrous roll (1429″)

Seals threads effectively in more applications

No need for pipe dope.

Easier to use – no waste!

All purpose – use on iron, brass, copper, aluminum, stainless steel, galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.

Characteristics

Compatible with a broad range of gases and liquids

Compatible with a broad range of piping materials

Will not harden or crack on the joints

Effective across a broad range of temperatures and pressures

Acts as a thread lubricant and anti-seize

Prevents electrolytic corrosion of threads

No curing time

Unlimited shelf life

Non-flammable

Non-toxic

Clean