What is PLA+ Material?
• PLA+ is improved and upgraded based on ordinary PLA (Polylactic Acid). It has higher strength and toughness, one of the most commonly used 3D printer materials, is an excellent choice for a wide range of printing applications.
24 Available Colors:
• Cold White, Bone White, White, Black, Grey, Silver, Brown, Light Brown, Fire Engine Red, Red, Magenta, Pink, Beige, Orange, Dark Yellow, Yellow, Pine Green, Green, Peak Green, Olive Green, Dark Blue, Blue, Light Blue, Purple
Recommended Printing Parameters:
• Printing Temperature: 210-230℃ (Recommended Temperature 215℃)
• Bed Temperature: 45-60°C
• Fan Speed: 100%
• Printing Speed: 40-100mm/s
• Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI
Vacuumed Sealed Packaging:
• Antioxidants + Vacuum Packaging + Product Manual
• eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
• 1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
• 2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
• 3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
• The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.
Customer Reviews | 4.6 out of 5 stars 364 | 4.1 out of 5 stars 99 | 4.4 out of 5 stars 1,279 | 4.8 out of 5 stars 47 |
Price | $27.29$27.29 | $26.36$26.36 | $30.49$30.49 | $54.99$54.99 |
Density (g/cm³) | 1.23 | 1.06 | 1.27 | 1.21 |
Tensile Strength (MPa) | 63 | 40 | 52.2 | 35 |
Flexural Strength (MPa) | 74 | 68 | 58.1 | / |
Flexural Modulus (MPa) | 1973 | 1203 | 1073 | / |
Elongation at Break (%) | 20 | 30 | 83 | ≥800 |
lZOD Impact Strength (kJ/m²) | 9 | 42 | 4.7 | / |
Melt Flow Index (g/10min) | 5 (190℃/2.16kg) | 15 (220℃/10kg) | 20 (250℃/2.16kg) | 1.2 (190℃/2.16kg) |
Heat Distortion Temperature | 53 (℃, 0.45MPa) | 73 (℃, 0.45MPa) | 64 (℃, 0.45MPa) | / |
Printing Temperature | 210-230℃ | 230-270℃ | 230-250℃ | 220-250℃ |
Bed Temperature | 45-60℃ | 95-110°C | 75-90°C | 45-60°C |
Fan Speed | 100% | 0% | 100% | 100% |
Printing Speed | 40-100mm/s | 40-100mm/s | 40-100mm/s | 20-50mm/s |