When placing your order please make sure to include:
* Make 
* Model (2 door or 4 door)
* Exact Year 
* Any modifications to the body and/or the door 
* Telephone number where the shipping company can contact you..(just in case)

This system is everything you need for a successful, reliable and cost effective conversion in a minimum amount of time.

The Kit includes
Front Drive's and Passenger's Side Direct Bolt-on Lambo Door Kit.
Heavy Duty German made Gas shock, (Pressurized for your specific automobile)
Installation Instruction

The kit Features:
Heavy duty constructions
Easy installation
Fully reversible (most cars)
Heavy Duty German made shocks (Beware of other sellers using low quality shocks)
Direct bolt on construction
Made by Vertical Doors, Inc.

With a Vertical Doors, Inc., kit, your ride will keep its factory look and feel while you are driving but the moment you stop and raised your doors you will experience a whole new level of attention that no other upgrade can give you. Vertical Doors, Inc., kits are proudly made and patented in the United States and are bolt-on kits made specifically for your particular vehicle. They only manufacture the best kits, best quality,strongest kits, and most affordable kit for the quality. Our line-up includes all the major vehicle manufactures.

Not only are our kit easy to install but they are also easy to operate, basically open your door like normal until it stops, at a predetermined position and then just raised your door up until it stops.You also have the option of not raising the door since unlike most Lambo Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, etc, imitators; our Vertical Doors, Inc., kits will allow you to get in and out without having to raise your doors.

Vertical Doors are also known as Lambo Doors, Lambo Door Kits, Lambo Doors Conversion Kits, Lambo Door Hinges, Lambo Style Hinge Kits, LSD, VDC, VDI, VDC Kits, VLS, Upright Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, or Evo Doors

We have 100's of kits in stock that will fit most of the major automobile manufacturers.

This Vertical Doors, Inc is covered under following U.S.A patents #7,941,897; #7,552,514; #6,808,223; #6,845,547; #7,140,075; #7,059,655 and other patents pending.

We carry the full line of Direct "Bolt-on" Vertical Lambo Door conversion kits from “Vertical Doors, Inc.” 

1. IS IT A DIRECT BOLT-ON?
(Weld-on kits may damage your vehicle and they are NOT vehicle specific)

2. DOES THIS KIT BOLT DIRECTLY TO THE FACTORY HINGE HOLES ON MY VEHICLE?
(If they say “NO”, the installation will be difficult and/or expensive)

3. DOES THIS LAMBO DOOR KIT COME COMPLETE WITH HARDWARE, SHOCKS AND DIRECTIONS?
Some sellers will mislead you and say “Weld-on” installation is easy and that there universal style kits is made for your particular vehicle.)

4. CAN YOU ACTUALLY TALK TO A SELLER?
(With other manufactures, Many times you will get “0” Support after the sale)

HERE ARE A COUPLE OF TECH TIPS

• Do not take Door off during installation Please follow the detailed instruction manual step by step 
• Use 2" painters tape to mark the factory location of your door on the horizontal and vertical plane also measure the distance between the apron and the front edge of the door by the botton and top hinge. 
• Make sure the mounting surface is flat as possible, if anything is there, grind the surface so the vertical door kit can sit and mount flat. 
• Make sure both allen screw adjustment on each system are adjusted accordingly. 
• The kit requires no modification, the kit is a bolt on, but most inner fenders must be rolled or trimmed. Make sure to trim a tittle at a time, you only need to trim enough to allow the swing arm to open and move up and down
• If you have any questions during the install PLEASE CALL.

Shock Maintenance - IMPORTANT STEP - Do not skip this step!

This step is crucial in your installation process, if this step is not completed when installing your vertical door kit; all warranties are voided and may cause future problems with your vehicle.

Make sure you put grease on the body of the shoulder bold where arrow is pointing.
Make sure you use RED Loctite where the arrow is pointing, on the tread of the shoulder bolt.
Make sure you put grease on the bottom side of the shock end.
It is recommended that every 3 - 6 months all parts of hinge be sprayed with lubricant to ensure smooth hinge operation.

Warning the use of any pliers, paint or foreign materials on shocks body or shaft will Void the Warranty.
Use No Pliers