PVA FISHING MESH

MADE BY WESTMORE PVA Fishing Mesh Manufacturer

20 METRES OF EASY LOAD PVA FISHING MESH IS FOR SALE

YOU GET 20 METRES 2 x 60mm Diameter TUBES WITH 5 METRES OF MESH ON EACH TUBE READY TO USE . PLUS 1 X MULTI PACK CONTAINING 2 X 5 METRE LENGTH REFILLS WHICH COME INDIVIDUALLY PACKAGED IN GRIP SEAL BAGS

The loaded mesh tubes will be sent to you as you see them in the picture 2 tubes per grip seal bag and delivered in a mailing sack.The tube on the right in the picture I have taken most of the mesh off so that you can see our UNIQUE ELASTICATED TOP BAND.You are buying at a low price for the size of tube and quantity of mesh on each tube.

THIS 20 METRES OF MESH RETAILS IN SHOPS AT RRP of £28.00

GRAB YOURSELF A BARGAIN

MADE IN ENGLAND

  • MESH SUPPLIED ON 60 mm DIAMETER TUBE (to allow quick & easy loading of bait)
  • UNIQUE ELASTICATED SECURING BAND (allows multiple tube fit on 60mm – 80 mm Diameter tubes & keeps mesh tidy & from sliding off the top of tube )
  • CAN MAKE LARGE BALLS OR SMALL BALLS (very versatile)
  • MAKE LARGE BALLS WITH LESS CASTING TO CATCH THOSE WARY CARP
  • HOLD THE LARGE BREAM SHOALS IN YOUR SWIM
  • OIL BASED ATTRACTOR LIQUIDS CAN BE USED IN MESH
  • CAST LONG & ACCURATE
  • SINK QUICKLY DOWN TO THE BOTTOM
  • QUICK TO LOAD & TIE
  • FULLY DISOLVES
  • USE ALL YEAR ROUND
  • BEST PVA YARN AVAILABLE USED
  • UNIQUE WESTMORE SPECIAL PVA DEVELOPED STITCH STRUCTURE
  • VERY STRONG
  • ANTI LADDER

    I Knit This PVA Mesh Myself in England out of the Best PVA yarn available.After many discussions with yarn suppliers I have been able to find a PVA yarn that fully dissolves in all waters and can be used all year round.

    Do not confuse this mesh with the small diameter tubes available in many tackle shops.This mesh is a NEW PRODUCT and is designed to make balls of any size.

    To give you some idea of the good value of the product you are getting Each 5 Metre Length is measured with the mesh lying flat & fully relaxed at 42mm wide. You are getting lots of mesh for your money and buying at a very low price.

    The mesh can be used with maggots as the stitch structure is small enough to hold most in as it takes a while for them to start pushing there way out. Ground Bait can also be used if mixed with an Oil Based Attractor .In the picture you will see 3 balls loaded with boilies and small pellets some as little as 1 ½ mm diameter in size.

    This product has been used & carefully tested by many experienced anglers who are really satisfied with the results. I have been able to come up with a great finished product that is affordable and Excellent value for money.

    The mesh is very versatile, and you can very quickly tie a golf ball sized ball or a cricket sized ball or larger depending on the weight your rod will take when casting.It is supplied on a 60mm Diameter Blue translucent tube (the tube is also made in the U.K) to allow quick & easy loading of the bait.

    A UNIQUE elasticated band has been knitted into the mesh right at the very top. This elasticated band (as shown in the picture) is a Unique idea and enables mesh to be used on different sized tubes from 60 mm – 80 mm. The Elasticated knitted band will stop the mesh sliding up the tubes and keeps everything very tidy and well finished.

    The mesh balls can be tied hard for accurate casting.They will sink quickly and explode in around 8-20 seconds in the warmer months depending on the water and water temperature.We have always had time to set the rods and get straight into the fish.In the winter months they have been fished on ponds with ice around the banks and can take up to 60 seconds to explode.

    MADE IN ENGLAND

    QUALITY PVA MESH TO MAKE LARGE OR SMALL BALLS

    How you use the mesh is up to you and your skill as an angler but we find to make the balls quickly & easily and to get the most balls out of the mesh per metre we tie them as explained below:-

  • HOLD MESH AND TUBE FIRMLY IN ONE HAND
  • FILL THE TUBE FROM THE ELASTICATED TOP END TO LEVEL REQUIRED
  • LET THE BAIT AND MESH COME DOWN CONTROLING IT WITH YOUR HAND AND A NICE BALL WILL FORM
  • NOW COMPRESS THE BAIT WITH YOUR HAND ( by resting the bottom of the ball on your leg and pushing down on the top of the ball with your hand works well you do not need a plunger)& TWIST THE MESH A LITTLE
  • ONCE TWISTED , THE BAIT WILL NOT NOW FALL BACK DOWN THE TUBE AND YOU CAN NOW TURN EVERYTHING UP SIDE DOWN HOLDING THE TUBE AND MESH BETWEEN YOUR LEGS (this leaves both hands free and locks the mesh on tube)
  • NOW FIRM THE BALL MORE BY TWISTING MESH & ONCE TIGHT ENOUGH USE PVA TAPE TO TIE OFF THE BALL(very easily done.The largest ball in the picture I have left a long tie off so that you can see how the pva tape has been tied to get a tight ball.I have cut off a strip of tape trapped one end of the tape between thumb and ball then wrapped the other end around the mesh working back towards the ball until tight enough before knotting ) OR TIE A KNOT INTO THE MESH
  • THE BALL IS NOW MADE AND CAN BE CUT OFF
  • THE CUT OFF MESH LEFT ON THE TUBE WILL NEVER LADDER BACK AND BECAUSE IT HAS ALREADY BEEN TWISTED WHEN FORMING THE BALL IT CAN NOW BE TIED IN A KNOT VERY EASILY (saving mesh & time)READY FOR THE NEXT BALL TO BE MADE

    If you decide to buy my British Made product thank you very much & you will be more than welcome to buy again when you need more mesh.

    THANKS FOR LOOKING