Main Description
TAKES 10mm,16mm & 25mm SHEETS
Product Information
- Economy roof glazing bar
- Ideal for lean-tos, shelters etc.
- Easily fitted - snaps into place
- Heavy duty aluminium base section with a tough UV stable upper section
- Suitable for polycarbonate 10-25mm
Available In:
- Brown
- White
- Cut the aluminium base section and uPVC top section to the same length as the polycarbonate sheet.
- Drill holes to suit a 5mm wood screw in the centre of the aluminium base between the toothed legs. The holes should be 100mm from each end and at no greater than 500mm intervals.
- Screw aluminium bases to rafters using wood screws.
- Lay polycarbonate sheets on rafters starting at one end.
- When all sheets are in position, remove the protective film and fit the uPVC top section by pushing the legs into the slots provided in the aluminium base. Push firmly home to ensure adequate seal.
- Fit endcaps to uPVC top capping.
- Fit end closure to polycarbonate sheet.
- Optional: In exposed conditions, or where large panels are used, Sheet Anchoring Fixings are recommended at the eaves and on the purlins to prevent sheet lifting. Note: For best results ensure pitch of roof is greater than 50.
Opening times: 08:00 - 17:00 Mon - Fri
09:00 - 12:00 Noon Sat
Closed Sunday
Delivery outside the Midlands will be made via courier. It is the customer's responsibility to check the goods when they are delivered. If in any doubt please sign for as damaged. Signing as unchecked will not enable us to make a claim on the rare occasion this is needed.
