This listing includes the White (100 lumen per foot) LED strip length that you selected form the drop box above as well as the appropriate POWER SUPPLY which plugs directly into a wall outlet. Power Supplies are different for different lengths. The longer the strip, the larger the power supply. Once you get longer than 40 ft there will be a large power supply that will require you to go both directions from the power to get the full length ( ---------LEDs----------power-----------LEDs----------- ). This means you can go both ways from the power and meet in the middle on the other side of the pool or anything else you are lighting.
OverviewCreate your own custom lighting with LED tape strips. Pre-applied 3M adhesive attaches to almost any surface and the sealed design is impact resistant. This single color White LED strip can be cut to custom lengths. Simply cut and go.
Once applying, you just plug in the stripand you are ready to go.
** Strips can be connected to each other if you need longer.
Highlights- Waterproof... See waterproofing details below.
- Longer life (50,000 hours) and much lower power consumption compared to rope lights or any other lighting
- Cut lines on circuit board for creating miniature segments
- Impact resistant to use anywhere with 3M adhesive backing
- Great for use as holiday lighting, indoor accent lighting, indirect lighting... even in automotive applications!
FOR WATERPROOF STRIPS
Waterproof Strips are silicone filled to protect the LEDs from water all along the top and sides of the strip. To fully protect the strip long term you will need to run a bead of silicone along both sides of the strip and all around any connection, plug and both ends of the strip. If you do not do this there is risk of the LEDs shorting out. Being a 12V light there is no safety issue. This suggestion is simply to protect your LEDs long term.
Why buy MY
LEDs??
1. The board color.
Instead
of "yellow board" my LEDs are on a much nicer and more durable white
board with an oil brushed surface.
The wire running through
this is 100% copper instead cheap short lasting iron as most LED strips
are.
2. The
board material
quality.
"A" is my LED strip with two layer board completely resistant to heat
and protected from short circuiting. (Very Common for cheap LED
strips)
3.
Silicone Filled NOT Epoxy (for Waterproof
Only)
Waterproof Strips are filled with
Real Silicone instead of epoxy glue that becomes yellow and faded over
time. The real Silicone is also the only way ensure a
consistent color temperature over time.
4.
Chip Connection
My LEDs have gold thread running
through to connect each LED and chip together rather than copper thread.
This will ensure a long lasting connection for LED to chip.
LED strip lights can be used for many applications
such as:
- Accent lighting
- signage
- under cabinet
lighting
- cove
lighting
- bar top
lighting
- club
lights
- TV
backlighting
- under counter
lighting
- task
lighting
- cabinet
lighting
- display case
lighting
- and
more!
>
"For God so loved the world, that he gave his only Son, that whoever believes in him should not perish but have eternal life."
John 3:16 ESV