Dosatron D3 GL2 Fertiliser Injector
Dosatron D3 GL2 Fertiliser Injector
This is for 1 Dosatron D3 GL2
The Dosatron D3 GL2 Fertiliser Injector is the ideal way to add feed to your lawn and plants.
3/4″ male BSP threaded connections.
Flow from 10 l/h to 3000 l/h Accurate dosing rates for 0.2% to 2% , 0.02 l/h to 60 l/h
Operating pressure 0.3 to 6 Bar
The piston unit has been simplified with only 17 parts instead of 52 giving better reliability and a longer life.
Very easy to assemble/disassemble the motor (either from the top or bottom, without no tools.
All plastic – no metal parts Easier adjustment
Operating principle
Installed directly in the water supply line, (Tank & Pump not Mains supply) the Dosatron D3 GL2 Fertiliser Injector operates by using the flow of water as the power source. The water activates the Dosatron, which takes up the required percentage of concentrate directly from the container and injects it into the water. Inside the Dosatron, the concentrate is mixed with the water, and the water pressure forces the solution downstream.
The dose of concentrate will be directly proportional to the volume of water entering the Dosatron, regardless of variations in flow or pressure, which may occur in the main line.
Markets
Environment – Hygiene – Water treatment – Vehicle wash – Metal processing
- Food processing – Graphic Arts – Horticulture…
Principal applications
Disinfecting – Cleaning – Fertigation – Phytosanitation – Lubrication -
PH/TH Correction – Sanitation – Flocculation – Vehicle wash…
Installation Regulations:
Refer to local water regulations, prior to installing your Dosatron.
To optimize your Dosatron, we advise to:
Install a filter (300 mesh [60 microns]) upstream, depending on your
water quality.
Change the dosing seals at least once a year.
Rinse as often as possible with clear water.
Turn off the water supply and allow the pressure to drop to zero before
adjusting the injection rate.
Install necessary protections for excess flow, excess pressure and water
hammer (anti-hammer flow/pressure device).
Install your Dosatron on a total by-pass line.
We sell everything to do with Irrigation look in my shop for more great offers, if you cannot see what you want just ask.
This is for 1 Dosatron D3 GL2
The Dosatron D3 GL2 Fertiliser Injector is the ideal way to add feed to your lawn and plants.
3/4″ male BSP threaded connections.
Flow from 10 l/h to 3000 l/h Accurate dosing rates for 0.2% to 2% , 0.02 l/h to 60 l/h
Operating pressure 0.3 to 6 Bar
The piston unit has been simplified with only 17 parts instead of 52 giving better reliability and a longer life.
Very easy to assemble/disassemble the motor (either from the top or bottom, without no tools.
All plastic – no metal parts Easier adjustment
Operating principle
Installed directly in the water supply line, (Tank & Pump not Mains supply) the Dosatron D3 GL2 Fertiliser Injector operates by using the flow of water as the power source. The water activates the Dosatron, which takes up the required percentage of concentrate directly from the container and injects it into the water. Inside the Dosatron, the concentrate is mixed with the water, and the water pressure forces the solution downstream.
The dose of concentrate will be directly proportional to the volume of water entering the Dosatron, regardless of variations in flow or pressure, which may occur in the main line.
Markets
Environment – Hygiene – Water treatment – Vehicle wash – Metal processing
- Food processing – Graphic Arts – Horticulture…
Principal applications
Disinfecting – Cleaning – Fertigation – Phytosanitation – Lubrication -
PH/TH Correction – Sanitation – Flocculation – Vehicle wash…
Installation Regulations:
Refer to local water regulations, prior to installing your Dosatron.
To optimize your Dosatron, we advise to:
Install a filter (300 mesh [60 microns]) upstream, depending on your
water quality.
Change the dosing seals at least once a year.
Rinse as often as possible with clear water.
Turn off the water supply and allow the pressure to drop to zero before
adjusting the injection rate.
Install necessary protections for excess flow, excess pressure and water
hammer (anti-hammer flow/pressure device).
Install your Dosatron on a total by-pass line.
We sell everything to do with Irrigation look in my shop for more great offers, if you cannot see what you want just ask.
We do offer discounts on the postage on combined orders so
please request an invoice before paying.
For Deliveries to Highlands and Islands please email for
Delivery Cost.
Please Visit our Ebay Shop 
