This auction is for a
Set of 8 GENUINE
Siemens Flow Matched 80 LB/HR short fuel
injectors. These injectors are IN STOCK, on our
shelves. You will receive a Set
of 8 BRAND NEW, Siemens injectors. The
injectors are matched to have only a 3.0%
variance, which means you know that you are
getting accurate injectors. We have had
these injectors tested to confirm the flow rates,
and typically the system balance is between 1.0% -
3.0%.
Please view the details section below to verify
these are the correct injectors for your
application
If you will need new OBD1 Bosch
EV1 center notch style injector clips they are
available in our eBay store for $45 or just
contact us if you have any questions and we can
create a special listing for you.
Wholesale Distribution
available, contact us and we can create a
special listing for you!
Wholesale Distribution available,
contact us and we can create a special listing
for you!
These High
Resistance(Approx. 12 OHMS) Saturated Siemens
injectors work on most top feed Bosch fuel
injected vehicles.
Email us if you have questions regarding
fitment.
These injectors
flow 80 lbs/hr at 43.5 PSI (3 BAR)
In addition, these units are high-impedance.
Despite the high flow rate these units are
high resistance, plus they are linear and
controllable at low pulse widths and have
been used in ULEV applications! This allows
you to use a larger injector than normally
possible without hurting idle and low speed
drive-ability. Adding to the flexibility of
application, these units are high-impedance;
making them compatible with most ECUs, while
delivering the most flow available in a
High-Impedance injector.
These injectors are able to function at high
fuel pressures and don't exhibit the high
fuel pressure handling problems found with
many other high flow high-impedance
injectors. Many tuners push these injectors
to 6 bar and higher. Engine performance and
running quality are enhanced through the
optimized spray pattern. Unlike competitors
pencil stream high flow injectors; these
injectors utilize a multi-orifice tip for
improved mixture preparation and
atomization. This results in lower BSFC and
better idle quality than many injectors with
less flow.
This newly released injector from
Continental (Siemens) is based on the DEKA 5
family. It features a laser welded orifice
plate with small holes for superior
atomization. The light-weight internal
components allow for fast opening/closing
times and enhanced high-pressure capability.
This high-impedance injector will work with
all factory ECM/PCM injector drivers.
These injectors are able to function at high
fuel pressures and don’t exhibit the high
fuel pressure handling problems found with
many other high flow high-impedance
injectors. This makes these injectors very
well suited to turbocharged and supercharged
applications that see high fuel system
pressures.
Engine performance and running quality are
enhanced through the optimized 8 hole
Multi-orifice spray pattern. Unlike
competitors “pencil stream” high flow
injectors; these High Flow injectors utilize
a multi-orifice tip providing a true 26
degree spray pattern for improved mixture
preparation. This results in lower BSFC and
better idle quality than many injectors with
less flow.
Specifications:
Condition: 100%
BRAND NEW
Flow Rate in CC per minute: 840 CC/min @
43.5 PSI
Flow Rate in LB per hour: 80 LBS/HR @ 43.5
PSI
Flow Rate in CC per minute: 875 CC/min @ 45
PSI
Flow Rate in LB per hour: 83 LBS/HR @ 43.5
PSI
Resistance: 12 ohms (High Impedance, High
Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
Spacers/O-rings Included: YES, on the
injectors
Fuel Delivery: Upgraded 8 hole disc fuel
delivery nozzle for superior fuel
atomization
Spray Pattern: 26 Degree Spray Cone
Electrical connector type: EV1 (Minitimer,
Jetronic)
Body Design: Compact, composite plastic
E85 Compatible: Yes
Offset: 0.065ms
Turn on time @ 14VDC: 1.3ms
Turn off time: 0.7ms @ 600KPa
Series: DEKA 5 ( DEKA V )
Overall Length: 48 mm, 1.9 inches
Oring to Oring Length: 34 mm, 1.4 inches
Diameter: 16 mm, 0.6 inches Orings: Top and bottom, 14.5 mm
Injector
clips
MAY
be
required
for
some
models,
research your install as these
take OBD1 Bosch EV1 center notch
style injector clips.
All high performance injectors
will require ECU tuning for proper
performance.
If
you will need new OBD1 Bosch EV1 center notch
style injector clips they are available in our
eBay store for $45 or just contact us if you
have any questions and we can create a special
listing for you.
We have injectors to fit almost every
performance application!
Check out our eBay
Store or contact us
|
-IN STOCK ITEMS- Ship no later
than the second business day after receiving cleared
payment.
Pay by 12pm PST and most orders will have SAME DAY SHIPPING!
Due to PayPal and Credit Card policies any item or
combination of items valued over $250 requires a
signature for delivery.
All items paid with PayPal must ship to the address
in the shipping address field in your payment
details as required by PayPal.
If there are any issues fulfilling your order we
will contact you and offer a full refund if there
will be more than 5 days until shipping.
Any item paid for with an echeck through PayPal will
not ship until the money clears, typically 3-5
business days.
We observe all major holidays; please contact us
before bidding if you are unsure of when your item
will ship.
Domestic Shipping Options (Please
note that day one is the day after the item
ships):
-UPS Ground- 1-7 days. Check at www.ups.com for your
location.
-USPS Priority Mail- 1-4 days but no detailed
tracking with this service.
-USPS Express Mail- 1-3 days and more detailed
tracking than priority.
-UPS Next Day Guaranteed- Order by 12pm Pacific Time
to ship the same day for next day guaranteed
delivery!
UPS Ground and USPS Priority Mail
do not have a guaranteed shipping timeframe. If
you need your item ASAP in a guaranteed number of
days we highly recommend upgrading to USPS Express
Mail or UPS Next Day.
International Shipping Services:
-USPS Priority Mail- 6-10 days typical delivery
time, but as long as one month on rare occasions.
BUYER BEWARE - NO TRACKING with this service.
-USPS Express Mail- HIGHLY RECOMMENDED 3-5 days
typical delivery time with tracking, but as long as
2-3 weeks on rare occasions.
-USPS Global Express Guaranteed- 1-3 days
GUARANTEED! (Most Countries, check USPS.com)
If available, this shipping service is listed in
eBay auctions as "Expedited Int'l Flat Rate
Shipping"
Since USPS Priority Mail
International does not have tracking we strongly
recommend upgrading international shipping to USPS
Express Mail or to USPS Global Express Guaranteed.
International Information:
We will ship any part from any auction to anywhere
in the world!
All customs fees are paid by the receiver.
Please research your customs fees with your local
government before ordering so you know what to
expect to pay once the shipment arrives.
We do not lower invoice values since it is a
violation of US and International custom laws.
All international shipments are shipped with the
correct value for the parts shipped.
eBay's NEW Feedback and
Detailed Seller Ratings (DSRs)
If you give us 4 stars, it may seem like a good
score, technically a 4 is "Satisfied", eBay,
however, considers this a low grade. eBay requires
sellers to maintain very high standards to continue
receiving the best pricing, which leads to lower
item costs for the customer. If you were satisfied
with the transaction, please leave positive feedback
with all 5 stars for the DSR ratings.
Please be patient and don't give
negative feedback or below 5 star Detailed Seller
Ratings without talking to us first.
Let us work to resolve your problem so everyone is
happy.
Credit card
payments can be made by calling
Due to new eBay policies, sellers are no longer
allowed to accept any other method of payment for
eBay items besides credit card, debit card or
paypal.
This means that TREperformance is not allowed to
accept other payment methods for any item purchased
through eBay.
It is always acceptable to visit our store in person
to make payment and pickup your item at:
TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627
RETURNS AND EXCHANGES:
We accept returns of unused, uninstalled, brand
new goods, but we must charge a restocking fee of
20% to cover the costs we incur from eBay, Paypal,
shipping, labor, etc. We also must charge a 20%
restocking fee on any order which is cancelled
after payment has been received, even if that
order has not shipped. This is also to help cover
the fees associated with eBay, PayPal, order
processing, restocking, etc. If you would like to
return or exchange an item please email us with
your paypal or authorize.net transaction id # and
the reason for the return or exchange.
No returns are accepted without an RMA number
which is given to the customer by TREperformance
via email. Always have the RMA number clearly
written on multiple sides of the package when you
return the item. If it is not clearly written on
multiple sides of the box it may be returned to
sender. All returns must be received within 30
days of purchase.
ACCEPTANCE OF TERMS:
Your bid is a contract! By clicking upon "Place
Bid" or "Buy It Now" or "Make Offer" the Buyer
acknowledges that this action shall be treated as
a legally binding "electronic signature," as this
term is defined under federal law in the
Electronic Signatures in Global and National
Commerce Act of 2000. Buyer also acknowledges that
he/she has read this web-page, as well as eBay's
"Rules for Buyers" in there entirety, and has
unconditionally accepted all terms included
therein. Buyer also thereby warrants that he/she
has any applicable legal authority to purchase
this equipment, and that he/she will not use,
sell, or otherwise distribute this item in any
manner in violation of applicable state and
federal laws. Buyer also agrees to indemnify and
hold harmless TREperformance Inc. for liability
from any and all claims arising out of Buyer's
use, sale, or other distribution of this item. No
refunds will be given unless the buyer receives
prior written approval from TREperformance Inc.,
and no repairs will be provided, nor labor charges
covered by TREperformance Inc. in any situation.
Seller reserves the right not to sell to bidders
with excessive negative or "0" feedback.
Contact info:
Email Anytime
Phone and Storefront Hours: Monday - Friday 8:00 AM
- 4:00 PM PST
Mailing,
Shipping & Storefront Address:
TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627
|