Product Description 

  • Color :  Silver

  • All of our vinyls, films and tints are between 0.14 - 0.2mm in thickness

  • Material : Hi Density Urethane Vinyl Film

  • Compatibility : Compatible and suitable for all types of cars and motorbikes

  • Uses : Car wrap and car wrapping, Paint Protection, decal stickers, Bonnets, Boot lids, Mirrors, Motorcycles, Laptops,- Just about anything

​What do you get ? 

  • Brand New pre-cut piece of silver Brushed Silver Vinyl Film

 

Product Features 

  • Extremely high quality

  • Protects your car/motorbike from rocks and stone chip damage

  • DIY Self-adhesive and Flexible - Will stretch with heat

  • UV Resistant

  • Will not fade, chip, crack or peel

  • Water Resistant

  • Easily Cleaned with water

  • Will not scratch your car decal. Easily removed. 

 

Why Buy From Us ? 

  • Highest quality films and vinyls - We stand by our product and do not sell inferior quality 

  • 100% Customer Satisfaction Guarantee

  • Dispatched same business day of payment

  • Local Pick and Inspection available via prearranged time

 

What do I need to install this ?

  • Desired size of vinyl

  • Felt tipped squeegee or by hand

  • Stanley knife or scissors

  • Cleaning cloth and soapy water

  • Hair Dryer will improve adhesiveness

 

How do I install this ? 

  • First you need to measure the area over which use need to install using a measuring tape. Always add at least 5 cm to length and width to allow for curves and to cut according to size

  • Clean desired area with soapy water and thoroughly dry

  • Carefully inspect desired area after cleaning to ensure there are no dirt or dust particles as this will impact the results

  • Stretch film using both hands over desired area. Large areas like bonnets may require 2 people. Starting from the middle, use felt side of squeegee to firmly smooth film from the middle of area to the edges. This will ensure there are no air bubbles. 

  • Cut the excess film from the edges for a smooth and professional finish

  • Be aware of the outside temperature. Ideal conditions for installation are 16°C to 31°C
  • The hairdryer can be used to assist with wrapping vinyl around curves. Make sure to use a low heat setting and keep the dryer at least 30 cm away from the vinyl. Please note : This vinyl is a DIY Product and we will not accept any responsibility for errors in the application process.

 

Please note due to differences in monitor settings there may be slight variations in color from this listing to the product in real life.

please check out my other listings for some great buying