Price: £18.47 GBP
You are buying
A Brake Master cylinder repair / Seal kit to fit
| Audi | 80 | 1300 | 1972 | 1986 |
| Audi | 80 | 1500 | 1972 | 1976 |
| Audi | 80 | 1600 | 1975 | 1986 |
| Audi | 80 | 1600 GTE | 1976 | 1978 |
| Audi | 80 | 1600 D | 1980 | 1986 |
| Audi | 80 | 1600 TD | 1981 | 1986 |
| Audi | 80 | 1800 | 1983 | 1986 |
| Audi | 80 | 1800 Quattro | 1984 | 1986 |
| Audi | 80 | 1800 GTE | 1984 | 1986 |
| Audi | 80 | 2000 | 1983 | 1984 |
| Audi | 80 | 2000 Quattro | 1983 | 1984 |
| Audi | 80 | 2200 | 1980 | 1983 |
| Audi | 80 | 2200 Quattro | 1982 | 1984 |
| Audi | 80 | 1600 | 1991 | 1994 |
| Audi | 80 | 1900 TD | 1991 | 1994 |
| Audi | 80 | 1900 Tdi | 1991 | 1994 |
| Audi | 80 | 2000 | 1991 | 1994 |
| Audi | 80 | 2000 Quattro | 1991 | 1994 |
| Audi | 80 | 2300 | 1991 | 1994 |
| Audi | 80 | 2300 Quattro | 1991 | 1994 |
| Audi | 80 | 2600 | 1992 | 1994 |
| Audi | 80 | 2600 Quattro | 1992 | 1994 |
| Audi | 80 | 2800 | 1991 | 1994 |
| Audi | 80 | 2800 Quattro | 1991 | 1994 |
| Audi | 80 | S2 Quattro | 1993 | 1994 |
| Audi | 80 Avant | 1600 E | 1993 | 1996 |
| Audi | 80 Avant | 1900 TD | 1991 | 1994 |
| Audi | 80 Avant | 1900 TDi | 1992 | 1996 |
| Audi | 80 Avant | 2000 | 1992 | 1996 |
| Audi | 80 Avant | 2000 E | 1993 | 1996 |
| Audi | 80 Avant | 2000 E 16V Quattro | 1992 | 1995 |
| Audi | 80 Avant | 2300 E | 1992 | 1996 |
| Audi | 80 Avant | 2300 E Quattro | 1991 | 1994 |
| Audi | 80 Avant | 2600 | 1992 | 1996 |
| Audi | 80 Avant | 2600 Quattro | 1992 | 1995 |
| Audi | 80 Avant | 2800 | 1991 | 1996 |
| Audi | 80 Avant | 2800 Quattro | 1992 | 1995 |
| Audi | 80 Avant | RS2 Quattro | 1994 | 1995 |
| Audi | 80 Avant | S2 Quattro | 1993 | 1995 |
| Audi | 90 | 1600 TD | 1985 | 1991 |
| Audi | 90 | 2000 | 1984 | 1991 |
| Audi | 90 | 2200 | 1984 | 1987 |
| Audi | 90 | 2200 E Quattro | 1984 | 1987 |
| Audi | 90 | 2300 E | 1987 | 1991 |
| Audi | 90 | 2300 E Quattro | 1987 | 1991 |
| Audi | 90 | 2200 E | 1987 | 1991 |
All the above models fitted withFAG cylinders with 20.6mm bore
Technical Assistance
It is common practisefor vehicle manufacturers to fit not only different makes of Master cylinder to
the same range of vehicles, but also differing sizes.
In most cases this information will be needed to confirm the suitability of a particular kit.
The size is normally stamped into the casting, however this is not always visible without removing.
Sizes are normally expressed in the major measurment, ie 23.8mm bore cylinders will be stamped 23
Please see below the most common size chart with Imperial equivalents
| MM | Imperial | Fraction |
| 15.9 | 0.625 | 5/8 |
| 17 | 0.6719 | 43/64 |
| 17.5 | 0.6875 | 11/16 |
| 19 | 0.75 | 3/4 |
| 20.6 | 0.8125 | 13/16 |
| 22.2 | 0.875 | 7/8 |
| 23.8 | 0.9375 | 15/16 |
| 25.4 | 1 | 1 |
| 27 | 1.0625 | 1 1/16 |
| 28.6 | 1.125 | 1 1/8 |
Please if in doubt, contact customer services prior to purchase.
Details below
