APM2.8 Flight Controller (detail
instruction please reference this link) - Newest APM version, with Shock Absorber designed - Arduino Compatible - Includes 3-axis gyro, accelerometer and magnetometer, along with a
high-performance barometer - Onboard 4 MegaByte Dataflash chip for automatic datalogging - One of the first open source autopilot systems to use Invensense's 6 DOF
Accelerometer/Gyro MPU-6000. - Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement
Specialties. - Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions
respectively. - Drawing:http://img01.taobaocdn.com/imgextra/i1/664694061/TB2JsClXVXXXXa4XXXXXXXXXXXX-664694061.jpg
NEO-7M GPS & Compass Module (detail
instruction please reference this link)
·U-blox NEO-7M GPS module
·Build in 25 x 25 x 4mm ceramic patch antenna
·LNA and SAW chip
·3.3V LDO low noise regulator
·UART (TTL) port with EMI protection
·3V Rechargeable Backup Capacitors
·Fix indicator LEDs
·Reverse polarity protection for input power
·NMEA protocol
·Baud rate : 9600
·Nav rate : 1Hz
·TIMEPULSE (fix LED) rate : 1Hz
3DR 433Mhz Radio Wireless Telemetry Kit (detail
instruction please reference this link) - 433-434.79MHz - Receiver sensitivity to -121 dBm - Transmit power up to 20dBm (100mW) - Transparent serial link - Air data rates up to 250kbps - MAVLink protocol framing and status reporting - Frequency hopping spread spectrum (FHSS) - Adaptive time division multiplexing (TDM) - Support for LBT and AFA - Configurable duty cycle - Built in error correcting code (can correct up to 25% data bit errors) - Demonstrated range of several kilometers with a small omni antenna - Can be used with a bi-directional amplifier for even more range - Open source firmware - AT commands for radio configuration - RT commands for remote radio configuration - Adaptive flow control when used with APM - Based on HM-TRP radio modules, with Si1000 8051 micro-controller and Si4432
radio module
Crius MAVLink-OSD V2.1 (detail
instruction please reference this link) ·ATMEGA328P Microcontroller ·MAX7456-EUI monochrome on-screen display ·5V/500mA DC/DC regulator for MAX7456-EUI ·Operating voltage: 5V(FTDI connector) and 12V(Video I/O connector) ·Supported NTSC & PAL ·FTDI connector ·Full MAVLink protocol support ·Graphical configurator tool
Crius Power Module (detail
instruction please reference this link) ·Input voltage: 6~28V (support 30V) ·Max current sensing: 90A ·Voltage and current measurement configured for 5V ADC ·Switching regulator outputs 5.3V±0.1V and 3A max ·6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector
Package includes: 1x APM2.8 FC with Shock Absorber 1x NEO-7M GPS module 1x Crius APM power module 1x Crius MAVLink-OSD V2.1 1x 3DR 433Mhz Radio Wireless Telemetry Kit 1x GPS bracket 1x 3DR Telemetry OSD Y Style Connection Cable |