|
|
|
|
|
|
|
This is GN10309 ignition coil ,diffferent from GN10494 ,please Compare the new coil to the old one before installing it.
Item Description
Type: Heavy Duty performance coils! Ignition coils with Copper windings.
Comes with the manufacturer’s one year warranty!
Materials Instruction
1. Epoxide-Resin Glue: Kyocera (Japan)
Epoxide-Resin Glue is specially developed as a isolate potting materials made by Kyocera Group. Now became the worldwide appointed brand by more than 60% company which make ignition coils.
2. Winding Wire---Elektrisola (Germany)
The Elektrisola Group is worldwide leading as a producer of fine and ultrafine enamelled copper wire (winding wire). It is produced and delivered corresponding to the industry standards IEC 60317, NEMA MW1000, JIS C3202 or to customer specific requirements. It can resist the temperature from minus 40 degrees centigrade to 180 degrees centigrade.
3. Plastic Material (PPT, PPO): SABIC (America)
PPO can resist the temperature of 180 degrees centigrade as well as voltage of 36,000 volts.
*Important* Please use the Below information to determine if the part(s) in this listing fit your vehicle.
Do not rely on the eBay 'compatibility' feature.
OEM Ref # UF375
OEM #12566569, 12583514, 12613057,D501C, 12613051, 12629037, C1508, 5C1551, 19279906, D510A,12583514 12613051 12613057 12629037 12566569 C1508
Specifications
Brand NEW fitting for the following years and models:
Buick Allure 2005-2008 3.6L
Buick Enclave 2009 3.6L
Buick LaCrosse 2005-2008 3.6L
Buick Rendezvous 2004-2006 3.6L
Cadillac CTS 2004-2009 3.6L
Cadillac CTS 2005-2007 2.8L
Cadillac SRX 2004-2006 3.6L
Cadillac STS 2005-2009 3.6L
Chevrolet Traverse 2009 3.6L
Chevrolet Vectra 2008 2.8L
Saab 9-3 2006-2009 2.8L
Saturn Outlook 2009 3.6L
Package Include: 6x Warranty Ignition Coils
Installation
Prepare the tools, park the car, and open the engine compartment
Loosen the screws of the upper cover of the engine in the picture, and remove the upper cover of the engine
Pull out the tube in the picture and put it aside (pay attention to the temperature of the engine to avoid scalding. When pulling out the vacuum tube, don't use too much force to avoid damage)
Use the ignition coil tool to pull up the ignition coil (note that the pulling force should not be too strong, pull it slowly, otherwise it will easily break the ignition coil connection wire)
Unplug the ignition coil connecting wire clip and take out the ignition coil
Put the new ignition coil into the engine, and fasten the ignition coil connecting wire clip, as shown in the figure, align the limit buckle and press the ignition coil tightly.
Install the unplugged pipe and restore it to its original appearance
Start the vehicle and use the detector to detect whether there is a fire. If there is no fire, turn off the vehicle, install the engine cover, and then cover the engine compartment cover
Picture Shop Category |
set of 6 Ignition Coil on Plug Pack For Buick Cadillac CTS STS SRX UF375
This is GN10309 ignition coil ,diffferent from GN10494 ,please Compare the new coil to the old one before installing it.
Item Description Type: Heavy Duty performance coils! Ignition coils with Copper windings.
Specifications Brand NEW fitting for the following years and models: Buick Allure 2005-2008 3.6L
Installation
Prepare the tools, park the car, and open the engine compartment
Loosen the screws of the upper cover of the engine in the picture, and remove the upper cover of the engine
Pull out the tube in the picture and put it aside (pay attention to the temperature of the engine to avoid scalding. When pulling out the vacuum tube, don't use too much force to avoid damage)
Use the ignition coil tool to pull up the ignition coil (note that the pulling force should not be too strong, pull it slowly, otherwise it will easily break the ignition coil connection wire) Unplug the ignition coil connecting wire clip and take out the ignition coil
Put the new ignition coil into the engine, and fasten the ignition coil connecting wire clip, as shown in the figure, align the limit buckle and press the ignition coil tightly. Install the unplugged pipe and restore it to its original appearance Start the vehicle and use the detector to detect whether there is a fire. If there is no fire, turn off the vehicle, install the engine cover, and then cover the engine compartment cover
![]() WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
![]()
Copyright of eccppautoparts. All rights reserved. |