Brand New Cambium Networks (former Motorola) Canopy PMP 430 5.8GHz 5780APUS OFDM Access Point with Sector Antenna, 5725-5875 MHz.

Sector Antenna is included. PoE Injector is Not included.

If you have any questions please contact us. 

The Cambium Point-to-Multipoint (PMP) 430 Access Point and Subscriber Module is the ideal solution for developing, enhancing and extending advanced broadband networks with more than 50 Mbps of total aggregate throughput for data transfer, voice and video applications. Based on OFDM technology, the PMP 430 offers robust performance, even in near or non line-of-sight (nLOS or NLOS) conditions. Cambium Networks products combine field-proven toughness with exceptional performance, security, ease-of-use and cost effectiveness.

Because of GPS Synchronization, Access Points can be co-located on the same tower location with other Cambium PMP. Subscriber Modules can be purchased with throughputs of 4, 10, 20 or Uncapped Mbps and throughput can be enhanced to existing modules via a fixed software license.

Cambium Networks provides exceptional wireless broadband connectivity solutions. With more than 3 million modules deployed in thousands of networks around the world, Cambium solutions are proven to provide cost effective, reliable data, voice and video connectivity.

SPECIFICATIONS

CHANNEL SPACING Configurable on 2.5 MHz increments for 5 MHz

Channel Configurable on 5 MHz increments for 10 and 20 MHz Channels

FREQUENCY RANGE 5725-5875 MHz

CHANNEL WIDTH 5 MHz, 10 MHz or 20 MHz

PHYSICAL LAYER OFDM 256FFT

MAC (MEDIA ACCESS CONTROL) LAYER Cambium Proprietary

ETHERNET INTERFACE 10/100BaseT, half/full duplex, rate auto negotiated (802.3 compliant)

PROTOCOLS USED IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP

NETWORK MANAGEMENT HTTP, Telnet, FTP, SNMPv2c, Prizm 3.3 and One Point Wireless Manager 2.2

VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority, dynamic port VID

CYCLIC PREFIX 1/4, 1/8 or 1/16 fixed

SUBSCRIBERS PER SECTOR Up to 200

ARQ Yes

COLLOCATION WITH PMP 58100 Yes, 10MHz guard band required or 5MHz with 3 ft vertical required; synchronization required

COLLOCATION WITH PMP 54100 Yes, 10MHz guard band separation or 5MHz with 3 ft vertical required; synchronization required

COLLOCATION WITH PMP 52100 YES

MODULATION LEVELS (ADAPTIVE) 1X=QPSK, 2X=16QAM, 3X=64QAM

LATENCY 5-7 ms

FORWARD ERROR CORRECTION 3/4 Reed-Solomon block coding

PACKETS PER SECOND 15,000

GPS SYNCHRONIZATION Yes

QUALITY OF SERVICE DiffServ QoS

MAX. AGGREGATE THROUGHPUT PER SECTOR (@20MHZ CHANNEL) 1X: 16.5 Mbps, 2X: 32 Mbps, 3X: 50 Mbps

MAX. AGGREGATE THROUGHPUT PER SECTOR (@10MHZ CHANNEL) 1X: 8 Mbps, 2X: 16.5Mbps, 3X: 24.5Mbps

MAX. AGGREGATE THROUGHPUT PER SECTOR (@5 MHZ CHANNEL) 1X: 3.5 Mbps, 2X: 7 Mbps, 3X: 10.5 Mbps

ANTENNA BEAM WIDTH 4 sector application (actual 3 dB antenna pattern: 65° azimuth 7° elevation; Triple null fill)

TRANSMIT POWER -30 to +21 dBm (to EIRP limit by region) (1dBm interval)

ANTENNA GAIN 17 dBi (w/ included sector antenna)

MAXIMUM TRANSMIT POWER 21 dBm

EIRP 36 dBm FCC

TYPICAL LOS RANGE 1X: 11 mi. (18 km), 2X: 5 mi. (8 km), 3X: 2.25 mi. (3.6 km)

WIND LOADING 90 lbs.

ANTENNA CONNECTION 50 ohm N-type

MEAN TIME BETWEEN FAILURE > 60 Years

ENVIRONMENTAL IP55

TEMPERATURE -40°C to +55°C (-40°F to +131°F)

WEIGHT Radio: 2.8 kg (6.1 lbs.)

W/Antenna: 6.1 kg (13.5 lbs.)

WIND SURVIVAL 190 km/hour (118 mi/hour)

DIMENSIONS (HxWxD) Radio: 35 x 21 x 11 cm (13.75” x 8.25” x 4.2”)

W/Antenna: 51 x 21 x 28 cm (20.2” x 8.25” x 11”)

MAXIMUM POWER CONSUMPTION 19W

INPUT VOLTAGE 24 to 59V

ENCRYPTION 56-bit DES