FOTGA DP3000(M1) Follow Focus

Introduction:

A follow focus is a focus control mechanism used in film and video cameras. It is ergonomic rather than strictly necessary; in other words it does not contribute to the basic functionality of a camera but instead allows the operator to be more efficient and precise. It is usually operated by a focus puller but some camera operators prefer to pull their own focus.

The mechanism works through a set of gears on the follow focus that are attached to teeth on the focus ring of the lens. These gears feed to a wheel which, when turned by a focus puller, will spin the teeth and thus the ring on the lens. 


★ FOTGA DP3000 Filmmaker System is designed for the photography and film enthusiast, with high cost-effective!!! 

★ There is an improvement on its inner structure to reach a high level in this field, which permits much less backlash, even better most of the follow focus on the market. There is also a button downside can adjust the tension of the gearbox to reach 2 dampen level.
 

★ Further more, the gear wheel on it can be detached and insalled in other side, which makes it suitable for both left and right hand photographer.

★ The white mark ring is made of magnet material. It can be detached or attached very easliy and quickly on matel-made follow focus. You can also buy additional mark ring.

★  The particular part of this follow focus can use different size gears. It works with 3 different size gear to meet your different need with various lens:

1. 38x0.8mm pitch, diameter: approx.28mm (not included)
2. 43x0.8mm pitch, diameter: approx.31mm (included)
3. 65x0.8mm pitch, diameter: approx.49mm ((not included)

(The included size is 43x0.8mm, just leave me a note if you need the other size) 


Specifications:

• Material: Metal 
   
• Long-life precision engineered gearbox enables accurate and reliable focusing 
   
• Compatible with industry standard Follow Focus Whip or Crank.
   
• Gear drive can be mounted from both side.(Works for both right-handed and left handed)
   
• This set includes flexible gear belt can be used with any zoom or prime lenses with a wide range of lens diamters(any size from 46 to 110mm)
   
• Adjustable locking systems
   
• Mounts onto 15 mm Rod Support (60mm center to center difference).
   
• MOD Drive Gear: Industry standard 0.8.Can work with different size gear to meet you need with different lens.
   
• Compatible with industry stand 15mm rods
   
• Rail distance:60cm
   
• Rail diameter: 15mm

FOTGA DP500 IIS 15mm Rod Rail

Feature:

★ This FOTGA DP500IIS adopts new design. It is completely made of metal-still sturdy enough for holding follow focus,camera,matte box,etc,just as FOTGA DP500II alway.
 

★ It is composed of a bottom cheese baseplate,a top baseplate for camera,2pcs 25cm length 15mm diameter rods.
 

★ The bottom baseplate and top camera mount baseplate are mounted on the 15mm diameter rod by seperate railblock,which makes them able to work independently.It will be easy to adjust the balance between them.
 

★ The cheese bottom baseplate is with 11 1/4"-20 screw hole and 2 3/8"-16 screw holes.
 

★ You can mount it on to tripod or a quick release plate. It allows you mount it onto your stabilizer. There is also 2 1/4"-20 screw  holes on the railblock of it.
 

★ The top camera mount baseplate is with a quick-release railblock,easily to mount and detach from the 15mm rods.
 

★ Instead of a little 1/4" screw bolt,this baseplate adopts a big thumb screw,which enable you to mount your camera on the baseplate much easier and quicker.
 

★ There is also a 1/4" screw hole by the size.You can connect a device with 1/4" screw on it,such as magic arm,etc.
 

★ You can also install a hand strap grip with your camera mounted on this baseplate rig.
 

★ Improved blue screws. There is spring inside,which makes the nut able to life and relocate to the right position you want it to be.

Specifications:

• Complete rail system is made of Metal 
   
• Color : knobs is blue and all other is black 
   
• Height of top baseplate can be adjusted between 54mm to 61mm.
   
• Rails length : 25cm 
   
• Rails dia : 15mm 
   
• Rails center-to-center distance : 60mm 
   
• Tripod mounting plate size : 80mm x 38mm 
   
• Camera mount plate size : 108mm x 42mm
   
• Screws thread : 1/4 & 3/8  

FOTGA DP3000 Matte Box M3

Introduction:

The FOTGA M3 matte box kit is designed for most of the DV cameras with wide angle lenses. It canalso works with standard 15mm rails, center-to-center rails distance 60mm.

Feature:

• Swing-Away : Wide Angle Matte box has a Swing-Away Feature. You can easily swing-away the matte box without disturbing the camera from the tripod and rail system and mount the matte box again on the camera within a second. The knob on the top of the swing-away bracket helps you to swing the matte box from the setup.
   
• 2 dual-purpose filter trays, support 4"x4" filter. One of the 2 filter trays is rotatable, which will be helpful when you use gradual ND filter.
   
• French Flag/Side Flags : The flags provide extra flare reduction and improves the quality of videos. The side flags are quick removable. They can be attached /detached easily. The flags are attached firmly on the sunshade matte box by hinge mechanism. The side flags can be opened to the desired length by using the small knob provided on the flags.
   
• Compatible with wide angle lenses camera .
   
• Compatible with 15mm rod , center-to-center rails distance 60mm.
   
• There are 2 15mm hole with center to center 60mm on the bracket by side, which makes you able to mount some other device by side. Besides, the 2pcs 15mm rod (20cm in length) is included.
   
• 4pcs different size donuts included.(103mm,76mm,64mm,51mm)
   
• Material: Made of metal and plastic

Suitable for:
Wide angle lenses on DV / HDV /Broadcast /16mm/35mm cameras.

Package including:

• 1 x Fotga DP3000 Follow focus
   
• 1 x 0.8mm matching gear belt (adjustable for 46mm-110mm)
   
• 1 x Standard M0.8-43T gear
   
• 1 x FOTGA DP500IIS DSLR 15mm rod rail baseplate
   
• 1 x FOTGA DP3000 M3 Matte Box 
   
• 1 x Top Flag 
   
• 2 x Side Flags
   
• 4 x Donuts for different lens sizes (103mm,76mm,64mm,51mm) 
   
• 2 x Filter Holder 4"x4" 
   
• 2 x 15mm Rod 
   
• 1 x Wrench 
   
• Note: Tripod is not included.