The AAL is a non-regenerable drinking water and general-purpose cartridge designed to reduce

fluorides to below 0.5 ppm. It is constructed totally from FDA grade materials and media.

The AAL cartridge utilizes a special fine mesh activated alumina that has been pre-conditioned

specifically for single use cartridge applications. Laboratory evaluations have demonstrated that

this pre-conditioning step will increase the AAL capacity to as high as 11000 ppm F+ with

effluent levels below 0.2 ppm from 10 ppm F+ feed.

High pH, high bicarbonate levels and high flow rates all adversely affect the capacity of the AAL.

For best results, do not exceed recommended flow rates and pH conditions. For influent streams

above 100 ppm of bicarbonate, reduce capacity by 50%; above 200 ppm, reduce capacity by 75%.

The AAL has also been shown to reduce arsenic to below 0.02 ppm (from 0.12 ppm feed).

However, the total capacity for arsenic has yet to be determined.

9 3/4 in.: Fits all standard 10 in. housings. (Also

available in 2.5" X 20" and Big Blue 10" and 20")

20 micron spun-bonded polypropylene.

550 grams of pre-conditioned fine mesh

ACTIVATED ALUMINA

100 micron reticulated poly foam.

0.25 gpm

*5500 ppm Fluoride

3-9

* From 10 ppm spiked feed to 1.0 ppm break

THIS END UP

TOWARD CAP

9 3/4 in.

Natural Body

2.5 in.