Add a race inspired look to your Shelby by installing this
Brand new SBS PERFORMANCE PARTS Front splitter and rear splitter for 2010-2014 Ford Mustang SHELBY GT500s made from 1/4" Black ABS plastic (same as the Ford Racing Leguna Seca splitter which retails for $800.00). 2 brand new Longacre or ALLSTAR 10" adjuster rods.

Front splitter bolts directly to the front bumper through the stock splitter holes (13-14s, bolts to the bumper, through the upper splitter, after the lower 3 pieces are removed).

Rear splitter is initially attached to the rear stock valance with 3M tape and then 6 holes need to be drilled into your rear valance through the splitters holes and the 6 bolts, 12 washers & 6 lock nuts need to be installed for final installation.

Comes with:

1- 1/4" ABS black splitter 70" x 23".

2- Longacre 10" adjuster rods (shipped seperately)

12- 6m 1.0 bolts (2 3/8" long) with 1 1/4" washers

4- 1 1/2" screws with 1 1/4" washers

1- Rear splitter

6- 1" bolts with 1 1/4" washer and locking nuts

PLEASE SPECIFY WHAT YEAR SHELBY THAT YOU ARE INSTALLING THESE SPLITTERS ON. THE 2010-2012 SHELBY'S REAR VALANCES ARE DIFFERENT THAN THE 2013-2014 SHELBYS.

ALSO NOTE, EACH SPLITTER IS MADE AFTER YOU PURCHASE AND PAY FOR YOU SPLITTER. ALLOW 3 BUSINESS DAYS BEFORE SHIPPING.

Note: not responsible for any damages that may occur from installing this product, especially at higher than highway speeds or racing.

This splitter is designed to create down force on the front of your car. The higher the speeds, the more downforce is created. DO NOT USE THIS Splitter without installing at least 2 spoiler support (adjuster) rods! Returns are accepted only if splitter has not been installed, unless there is a fitment issue or the incorrect splitter was purchased-based on year or model mustang.
Note: The 2 support adjuster rods are shipped separately from the distriubuter

Note: We design and manufacture splitters. Support rods are included as a package in this listing as a courtesy. They are drop shipped from their distributors, not shipped with the splitters. We have no control of availability. If at all possible, we use Longacre Support rods, but we may have to drop ship other brand of Support rods like APR or Allstar.
FYI: The grainy side of the automotive ABS is the top/upper side of the splitter. The smoother side of the splitter is the bottom. The grainy side is extremely durable. Theses splitters are almost impossible to break which makes it so ideal for this applications. Please note that bottom smoother side may come with lines from manufacturer and the bottom side is very easily scratched, even a soft microfiber cloth can scratch because it is raw, unfinished ABS plastic. Some buyers have opted to have the bottom side painted and have installed the splitters upside down, allowing the painted side to be on top.

Please note that black ABS is a solid plastic that is the actual product color.  This product is designed to have the grainy, textured side facing up or out.  The bottom, smooth side may have some sheen but it is not a finished product and it can scratch easily. The smooth side can be installed facing up or out, only if it is painted or you have a wrap overlaid on it.
NOTICE: due to supply chain shortages of resins and increased petroleum costs (both used in making of plastics), the raw ABS material prices are increasing by $40 per unit as of February 28, 2022.  We will be forced to raise our prices by $40 on March 1, 2022.