The 3M™ Water Filtration Product Model HF15-MS single cartridge water
filtration help provide high quality water for the perfect cup of
coffee or tea by reducing the effects of sediment and chlorine taste and odour at
flow rates up to 3.8 lpm (1.0 gpm). A proprietary slow release scale inhibitor
reduces the ability of calcium and magnesium to form on the heating coils
causing downtime and unscheduled service maintenance.
HF15-MS combines scale reduction with sediment and chlorine taste and odour
reduction from higher turbidity water for up to 13,249 litres (3,500 gallons).
Features & Benefits
• Consistent great tasting brewed coffee and tea from water with reduced
sediment and chlorine taste and odour.
• Better equipment protection from reduced sediment particles that can clog the
spray head.
• Reduced scale formation by the controlled release of proprietary scale
inhibitors as tested by CUNO.
• NSF Standard 42 and/or FDA CFR-21 compliant materials.
• Valve-in-head design simultaneously shuts off and vents water, allowing for
simple and virtually trouble-free cartridge change-outs without the need to
shut off the upstream feed water.
• Optional pressure gauge allows monitoring of downstream water pressure.
Application
Coffee / Hot Tea
Product Specifications
Model: HF15-MS
Reduction
Claims: Sediment, Chlorine, Scale, Taste & Odour
Capacity: 13,249 litres
Service
Flow Rate: 3.8 lpm
Application: Higher (1.0 gpm)
Physical Specifications
• Single Filter cartridges are o-ring seal type.
• Filter cartridge maximum operating pressure of 862 kPa (125 psi) and
operating temperature of 37.8°C (100°F).
• Recommended service flow rate is up to 3.8 lpm (1.0 gpm).
• Filter cartridges incorporate carbon block filtration medium and scale inhibitor.
• Filter cartridges materials are NSF Standard 42 and/or FDA CFR-21 compliant.
• Cartridges are sanitary in design, requiring no contact with the filter media
during cartridge change-out.
• Filter cartridges require no pre-activation.
• NSF Performance Data Sheet (PDS) is included.