SUNSETTER NOW AVAILABLE - This will run both channels of your ReefBar Pro with Sunset, Sunrise, thunderstorms, moonlight, and everything else you can think of. Just plug in, use the preset timers or customize a timer and everything will just run on its own. Choose in the drop down and you will get 2 sunsetters and 2 power supplies so you can run your whole system.
The ReefBar Pro is our Newest addition to affordable reef and freshwater LED Lighting!
This listing is for the BLUE HEAVY ReefBar Pro with 3W Bridgelux LEDs. The LEDs are in the following layout:
10in- 4x 445nm actinic blue, 2x 465nm Aqua Blue, 1x 423nm UV, 3x 12,000K White
19in- 9x 445nm actinic blue, 3x 465nm Aqua Blue, 2x 423nm UV, 4x 12,000K White
24in- 12x 445nm actinic blue, 4x 465nm Aqua Blue, 3x 423nm UV, 5x 12,000K White
30in- 15x 445nm actinic blue, 5x 465nm Aqua Blue, 3x 423nm UV, 7x 12,000K White
36in- 18x 445nm actinic blue, 5x 465nm Aqua Blue, 4x 423nm UV, 8x 12,000K White
44in- 21x 445nm actinic blue, 6x 465nm Aqua Blue, 5x 423nm UV, 10x 12,000K White
68in- 33x 445nm actinic blue, 10x 465nm Aqua Blue, 7x 423nm UV, 15x 12,000K White
12000k slightly bluish white
423 nm UV Purple just at one peak of Chlorophyll A
445 nm Royal Blue at the happy medium of Chlorophyll A and B
465 nm Light Aqua Blue just at one peak of Chlorophyll B
10in- 10x 3W LEDs (no lens for best spread) Brackets go from 10.5in-20in
19in- 18x 3W LEDs 90º Lens (can be removed) Brackets from 19.5in-29.5in
24in- 24x 3W LEDs 90º Lens (can be removed) Brackets from 24.5in-34.5in
30in- 30x 3W LEDs 90º Lens (can be removed) Brackets from 30.5in-40.5in
36in- 36x 3W LEDs 90º Lens (can be removed) Brackets from 36.5in-46.5in
44in- 42x 3W LEDs 90º Lens (can be removed) Brackets from 44.5in-54.5in
68in- 66x 3W LEDs 90º Lens (can be removed) Brackets from 68.5in-78.5in
Brackets can easily be removed as well when not needed
Endless study has gone into making the ideal LED bar for your Reef. All of the ReefBar Pros come with 2 power supplies, one for the blues and other for the whites/UV/Aqua, so you can control your overall color temperature (if you add dimmers in accessory dropdown) and run on two separate timers as well. This fixture at full blast runs around 20000K-23000K.
Features:
- High CRI Bridgelux 3W LEDs
- Extending Brackets for Mounting Above your aquarium
- 2 Channels to control Whites and blues separately
- Fully and Seamlessly Dimmable with dimmers available above
- Over 7ft of cord from Wall plug to the Light Bar so your wiring options are flexible
- Completely Waterproof to keep Salt Creep and splashes or bubbles from getting in
- 90 Degree Dome Lenses to give perfectly even coverage throughout the 90º angle and sends all light straight down to the corals. No loss of light and power shining out on your walls and hitting the glass where nothing is.
- Wonderful PAR and PUR Ratings at near 100 at 18 inches under water (2 bars will give over 120 at 24 inches under water)
- Light Sleek Design at only 3/4 inch thick and 2.0 inch wide
- Silent with No fans needed
The REAL Numbers:
A single ReefBar Pro adds PAR numbers of up to 100 (mms) to the bottom of 19 inches of water (light placed 3 inches above surface)
Two of these bars can very easily become your Primary Lighting for a larger tank. A common goal for ideal lighting in a reef tank is about 90-120 (mms) at the top of your sand and two bars will give 120 at 24 inches. 3 bars will give over 100 at 30 inches deep.
- Input voltage: AC 85-265V 50-60Hz (Power Supply converts to 12V for bar)
- Power consumption: 3W per inch
- LED quantity: 1 per inch
- LED sources: Bridgelux HIGH CRI 3W LEDs
- Material: Aluminum extruded sections
- Beam Angle: 90 degree
- Lights Size: .75 in X 2.0 in
- Certificated: CE and ROHS
- Warranty: 2 years
- 110V Plug
- 50,000 Hour Life Span (Over 17 YEARS at 8 hours a day)