|
Description:
- 100% brand new and high quality
- Material: Electrical components
- Color: See pictures
- Description:
- FRM01 multifunction relay control module,
specifically designed for a variety of users with different requirements,
the use of micro-controller as the primary
controllers, presets 18 types of functions, and can be based on user
requirements, customize and add other specific functions.
genuine high quality power relay modules, high-power high-voltage transistors,
red, blue beacons, military rank on two sides
PCB board, cloth board to consider a global approach, stable performance, can be
widely used in a variety of type of power control applications.
- Features:
- 1 new update to version 2.0, the module
features eight types before, it increased to 18 types, to meet the needs of
multiple applications;
- 2 increase supply anti-reverse function, power
not to damage the wrong form;
- 3 uses top-quality high-voltage power modules,
discrete power supply before replacing the most stable and reliable system;
- 4 rose 0.1 seconds timing, timing accuracy
from the previous 0.1 seconds, upgrade to 0.01 seconds;
increase of 5 in the automatic power saving feature, users can set
independently.
- 6. Size: 66x40x1.5mm (about)
- Module functions:
- Tips: 1-8 function on power-up of 9-18 Start
auto-function require high pulse signal (high duration is shorter than 20 ms,
hereinafter the same) trigger the start.
- Feature 1:
- Withdrawal Timing: After the ignition, the
relay delay time pulling T1, T1 between 0.1 seconds-270 hours adjustable, CH1
interface to a high-level pulse signal, repeat the above functions;
- Function 2:
- Timing off: when the power relay, relay delay
time unplugged T1, T1 between 0.1 seconds-270 hours adjustable, CH1 interface to
a high-level pulse signal, repeat the above functions;
- Function 3:
Timing pull out again: After power relay not to pull, the delay time T1 reaches
the relay is energized; pull the relay off after time t2 of arrival, delay time
T1 and T2 in 0.1 seconds-270 hours between adjustable, CH1 interface to a
high pulse signal, repeat the above functions;
- Function 4:
Timing and then pull off: After the ignition, immediately pull the relay, the
relay off delay time T1 after arrival; T2 time relay comes after disconnecting,
-270 hours in 0.1 seconds, the lag time between T1 and T2 adjustable for CH1
interface a high pulse signal, repeat the above functions;
- Function 5:
Endless loop timing modes 1: After power relay not to pull, after the delay time
T1 reaches the relay is energized; pull off the relay after the time T2 comes,
and then repeat the above condition, the delay time T1 and T2 in adjustable
between 0.1 second-270 hours, giving a high-level pulse signal CH1 interface,
you can restart functions above;
- Function 6:
Endless loop timing mode 2: After the ignition, immediately pull the relay delay
time T1 reaches the relay off; comes after disconnecting relay T2 time, and then
repeat the above condition, the delay time T1 and T2 in 0.1 seconds adjustable
between-270 hours, giving a high-level interface CH1 pulse signal, you can
restart the functions of which above;
- Function 7:
Finite loop timing mode 1: 5 on the basis of functionality, increasing the
number of cycles of operation, this time between T1 and T2 in 0.1 seconds
adjustable adjustable-9999 NX cycles seconds between 1-9999 times for CH1
interface of a high pulse signal , the above functions can be re-started;
- Function 8:
Finite loop timing mode 2: 6, on the basis of the function, by increasing the
number of cycles of operation, this time between T1 and T2 in 0.1 seconds
adjustable adjustable-9999 NX cycles seconds between 1-9999 times for CH1
interface a pulse signal above, the above functions can be re-started;
- Function 9:
latching relay mode: CH1 interface to transmit a high-level pulse signal, relay,
giving a high pulse signal relay disconnected.
- Function 10:
relay activation mode: CH1 interface to a signal relay, relay, high disappear,
disconnect relay.
- Function 11:
pull the trigger timing: After power relay does not act, a high level of CH1
pulse signal interface, the relay delay time pulling T1, T1 between 0.1
seconds-270 hours adjustable, repeat for CH1 high-level pulse signal interface,
repeat the above function;
Function 12:
Timing off: After power relay does not act, a relay of CH1 for high level pulse
signal interface, the relay off delay time T1, T1 between 0.1 seconds-270 hours
adjustable, repeat for CH1 interface of a high pulse signal, repeat the above
functions;
- Function 13:
pull the trigger and disconnect timing: After power relay does not act, CH1
interface to a high-level pulse signal, the delay time T1 reaches the relay is
energized; Pull the relay off after T2 time of arrival, time delay T1 and T2 of
0.1 seconds-270 hours adjustable, repeat CH1 interface to a high-level pulse
signal, repeat the above functions;
- Function 14:
disconnect and then pull the trigger timing: After power relay does not act, a
high level pulse CH1, immediately pull the relay signal interface, the relay off
delay time T1 after arrival; T2 time relay comes after disconnection, time delay
between T1 and T2 in 0.1 seconds-270 hours adjustable, repeat CH1 interface to a
high-level pulse signal, repeat the above functions;
- Function 15:
Infinite Loop Timing Mode 1: after power relay does not operate CH1 interface to
a high-level pulse signal, the delay time T1 reaches the relay is energized;
pull off the relay of the T2 arrival time, and then repeat the above condition,
the extension when the time between T1 and T2 in 0.1 seconds-270 hours
adjustable, repeat CH1 interface to a high-level pulse signal, the above
functions can be re-started;
- Function 16:
Endless loop timing mode 2: After power relay does not act, a pulse for CH1 high
level, immediately pull the relay signal interface, the relay off delay time T1
after the arrival; break time T2 after reaching the relay, then repeat the above
condition, the delay time between T1 and T2 in 0.1 seconds-270 hours adjustable,
repeat CH1 interface to a high-level pulse signal, the above functions can be
re-started;
- Function 17:
Finite mode timing loop 1: 15 on the basis of functionality, increasing the
number of cycles of operation, this time between T1 and T2 in 0.1 seconds
adjustable adjustable-9999 NX cycles seconds between 1-9999 times, repeating for
CH1 interface of a signal high pulse, the above functions can be re-started;
- Function 18:
Finite mode timing loop 2: 16 on the basis of functionality, increasing the
number of cycles of operation, this time between T1 and T2 in 0.1 seconds
adjustable adjustable-9999 NX cycles seconds between 1-9999 times, repeating for
CH1 interface of a signal high pulse, the above functions can be re-started;
- Connections:
- Side control module: there are wire interface,
all interfaces are terminal
- 1, DC + 12 V positive
- 2, DC-: negative power
- 3, CH1: Interface Input Detection
- Relay outputs: a wireless interface, all
interfaces are terminal
- 1, NO: normally open (. Before the relay
closes, this pin is not connected. After the relay closes, the short stud
connects with COM)
- 2, COM: Relay Common Interface
- 3, NC: normally closed (. Before the relay
closes, this pin to connect with COM. After the relay closes, the pin is not
connected)
- No retail Package
- Quantity:1Pc
- Note: Due to the difference
between different monitors, the picture may not reflect the actual color of the
item. Thank you!!
Package includes:
- 1Pc x DC 12V Multifunctional
Auto-lock Relay PLC Cycle Timer Time Delay Switch Module
|