Version 1:

Package Included:

Feature:

1. Adopting the capacitance step-down principle design, not suitable for high frequency occasion.

2. Used to monitor the household voltmeter, also applied to other AC voltmeter measuring.

3. Good stability and high measurement accuracy.

4. With trimmer potentiometer.

5. Easy to read, install and use.

Technical Parameters:

1.Measuring range: AC70V-500V

2.Limit input voltage: AC500V Note: please input less than AC500V,over will burn.

3.Allowable error: ±1%

4.Input impedance: >1MΩ

5.Operating current: Red<23mA,Green<18mA,Blue<17mA

6.Refresh rate: about 300mS/time

7.Display mode: Three 0.56" LED digital tube

8.Display color: Red/Green/Blue

9.Lead length: 20cm

10.Size detail: 48*29*22mm(L*W*H)

11.Opening size: 46*27mm

12.Weight: 25g

13.Working temperature: -20℃~65℃

Wiring:

Red line:Power Supply + Measure Voltage +(AC70V-500V ); Black line:Power Supply -, Measure Voltage-

Version 2:

Package Included:

1 x (5 in 1) AC264V 100A Digital Combo Panel Meter

1 x Current Transformer

       Feature:

-      Electrical combo meter measurement function (voltage, current, kilowatt hour, power, cumulative working time).

-      Cumulative working time function.

-      Electricity, cumulative working time clear function.

-      Blue LED Backlight ON / OFF function.

-      Power-off data save function (save cumulative power, working time, display status and backlight on/off status).

-      Large-screen LCD display (voltage, current, kilowatt hour, power, working time)

-      Current transformer included.

       Parameter:

-      Operating Voltage: AC 80~264V

-      Voltage Measuring Range: AC 80~264V

-      Current Measuring Range: 0~100A

-      Energy Measuring Range : 0~9999.99KWh

-      Rated power: 0~22000W

-      Working Time: 0~9999.59h

-      Operating frequency: 45~65 hz

-      Measurement accuracy: 1.0 class

-      Dimensions: 96.4mm(W) x 44mm(H) x 24mm(D)

-      Cutout Dimensions: 91.5mm(W) x 39.5mm(H)

   Wiring Reference：

Key Function

Version 3:

Package Included:

1 x 4-in1 20A Digital LCD AC Combo Meter

 Function：

1. Electrical parameter measurement function (voltage, current, active power, energy)

2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).

3. Power alarm threshold preset function (can set power alarm threshold).

4. The reset function of energy key.

5. Store data when power off.

6. Large-screen LCD (display voltage, current, active power, energy at the same time)

7. Backlight function.

Appearance and Key function：

I. Display Interface

Display interface is a large-screen LCD, it can display voltage, current, power, energy parameters at the same time.

II.Display format

1.  Power: test range: 0~4.5kW(20A version)    

Within 1kW, the display format is 0.0~999.9W;

Within 1kW~10kW, the display format is 1000~9999W;

10kW and above, the display format is 0.1~22.0kW.

2.  Energy: test range: 0~9999kWh

Within 10KWh, the display format is 0~9999Wh;

10kWh and above, the display format is 10~9999kWh.

3.  Voltage: test range: 80~260V

Display format: 80~260V

4.  Current: test range: 0~20A(20A version)      

Display format: 0.00~20.00A(20A version)   

III. Key

1. Backlight control

Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.

2. Reset energy

Step1: Long press the key for 5 seconds until the number in energy display window flash, then release the key.

Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. 
If you don’t want to clear, then long press the key for 5 seconds again until the number doesn’t flash,
it means the energy value is not cleared and will exit the reset state.

3. Set power alarm threshold

Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state

Step2: Power window display the current power alarm value and the last digit begin to flash, 
then you can short press to plus 1, when there is no operation over 3 seconds, 
it will switch the digit position automatically, the setting method is as same as the above.

Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, 
the range of active power threshold is 0.0～22.0kW

     Precautions：

1. This module is suitable for indoor, please do not use outdoor.

2. Applied load should not exceed the rated power.

3. Wiring order can’t be wrong.

    Specification parameters：

1. Working voltage: 80 ~ 260VAC

2. Test voltage: 80 ~ 260VAC

3. Rated power: 20A/4500W(20A version)    

4. Operating frequency: 45-65Hz
5. Measurement accuracy: 1.0 grade

   Wiring Reference 20A version：

Version 4:

Package Included:

1 x 4-in-1 Color LCD Digital Combo Panel Meter

Specification:

             

                                                       Payment                                                      

We only accept payment via Paypal.

The buyer is responsible for any applicable import duties and local taxes.
Usually there's no any charges for small parcel. But please verify with your customs before making your purchase.