Length:4m (157inch)
Style: z Shape
Package Include:
1x 4M CAR TRUCK Motor Door Rubber Seal Weather Strip
installation method:
1: The body must take before pasting paste parts deal with clean, do not have any stains and moisture.
2:
After pasting to keep clean, do not suffer long against dirt and
water, otherwise it will lose tack 3M tape effect, there will be off
open plastic phenomenon.
3:
Paste selected bits identify the paste will start from the front side
door seal the lower end of the rod began to carry out a little pressed
paste, be careful not to pull the seal a little action, try to keep the
prototype seal slowly aligned identify the Paste the path carefully
paste; position in the corner of the door frame, seal very gentle to
pay attention to bend away type, do not bend too fast aesthetic impact.
Figure fast not seek hurry, so as to ensure results.
4:
All pasted into After the check, after a while the time were
thoughtful and meticulous hand pressing it, you can call it a day, and
this time it is best not to close, wide open doors on 20 minutes after a
closed door, Then the best other 3 - 5 hours before normal use to open
the door.
5:
complete ban after pasting a hand to pull the seal ban car washing
water on in three days as much as possible not to repeatedly switch the
door within 24 hours.
6: Construction of close will be a little tight, please do not worry, in the first 2-3 days when you can normal.
7: please everyone in 1-2 days time more attention to the door is not closed, safety first.