Wheel Bolt Pattern：6x5.5 6X139.7MM
Vehicle Bolt Pattern ：6x5.5 6X139.7MM
Thickness ：1.25 inch (32mm) per spacer
Thread Pitch：M12X1.5
Quantity：4pcs per set
Hub/Center Bore ：106MM, hubcentric
Studs：10.9 Grade, stronger than OEM 8.8 Grade
Material：6061 T6 Billet Aerospace Aluminum
Surface Treatment：Anodize
NOTE
1.The spacer will not fit the front wheels with locking hub, such as some years Land Cruiser, Pickup etc.
2.Recommend buy our ET lug nuts together for more safety driving.your original studs maybe too short to contact the nuts enough.
3.Re-torque all lug nuts after 25-50 miles of driving, then again 2-3,000 miles.
4.Avoid an impact wrench; improper usage may cause damage to components.
Toyota:
1989-2024 4Runner
2016-2024 Tacoma
1995-2015 Tacoma 4WD/Pre-Runner/VVT-i (not fit 2WD S-Runner or X-Runner)
2000-2006 Toyota Tundra
2007-2020 FJ Cruiser
2001-2007 Sequoia
2004-2019 Ventury H200
2005-2020 Fortuner
1982-1997 Land Cruiser
Lexus:
2010-2023 GX J150 GX460
2002-2009 GX J120 GX470
✔Our Hubcentric Wheel Spacers with Wheel-Centric Lip. This means it will fit perfectly over your hub - eliminating possibility of vibrations,
No impurity on the inner of hub.
✔Bolt On Installation kit - Comes with everything you need for a complete installation.
✔Compared to the most of wheel spacers on the market, our wheel spacers provide your vehicle
with a more aggressive stance while improving its handling performance and stability.
✔Machine-manufactured precisely from Forged 6061-T6 aircraft-grade aluminum billet,
with heat-treated and hardened 10.9 grade bolts pre-installed.
✔The anodized surface provides additional resistance to corrosion.
✔Extraordinarily strong and light compared to spacers made of steel.
✔We are committed to do business integrity quality after-sales guarantee.
✔If you have any questions about installation,be free to contact us .
How to mount Lug nuts?
Place the wheel spacer on the vehicle's studs until it sits flush, mount ksp's lug nut into the wheel spacer. Then place wheel on the wheel spacers, mount stock/factory lug nuts on the wheel.
How to choose the correct wheel spacers：
STEP. Check 3 specifications
The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole.
5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
