The Flexi-Dry MP freeze dryer is a bench-top alternative for up to sixteen samples, using the ports located on the adjustable manifold with a titanium condenser. The user can monitor a variety of conditions during processing and hosts a microprocessor for simplified instrument management. This unit is a low hour model from the University of Northern British Columbia. 

This FTS freeze dryer is fully functional and cools to -92C which exceeds manufacturer's specifications. Defrost cycle operates as designed. Included is a dual-stage Leybold rotary vane vacuum pump. This pump is 120Volts and plugs into the rear of the FTS unit. The pump high vacuum oil has been drained and replaced. Also included is an auxiliary stainless freeze-dry pot of approximately 4 litres capacity.

In operation the freeze dryer chills to -92C in approximately 5 minutes. Vacuum for the system reached 119 mTorr in approximately 7 minutes as shown in auction photographs.

Manufacturer FTS Systems

Model Flexi-Dry

D-3-85A-MP

Serial Number 41607

Tested Temp/Manufacturer's Spec. -92/-85 Degrees Celsius

Dimensions 22x15x29" and 132 lbs.

Power Requirements 120V~ and 60 Hz, 20 AMP circuit

Product Features -Ti Condenser

-Microprocessor

-SS Condensate Drip Pan

-16 Port Manifold

-Capacity 3L/ 24 hrs. @ -85 degrees C