Featuring a 12% larger stainless steel platform area for cleat support and improved power transmission as well as an overside axle with a three bearing double-sealed bearing axle. Making the LOOK KEO 2 Max Pedals a superb lightweight performance road pedal option.

Features:

• Use: Road - from leisure to competition.
• Body: Composite.
• Spindle: Chromoly +.
• Thread: 9/16 x 20mm.
• Roller bearing: 1 ball bearing, 1 needle bearing.
• Height spindle/sole: 15.7mm.
• Pedal spindle/crank distance: 53mm.
• Multitensor: Adjustable from 9 to 15.
• Cleats: Grey KEO grip cleats.
• Angularfreedom: 0, 4.5 or 9 degree according to type of cleat (black, grey, or red).
• Pedal weight: 130 grams per pedal (328 grams per pair with cleats and hardware).
• Accessories: One pair grey KEO grip cleats and hardware (6 screws 5 x 11mm and 6 washers).
• Warranty: 2 years.

Technical features:

Large and resistant cleat contact area.

For a more efficient and more comfortable pedal stroke, the KEO 2 MAX has a cleat contact surface area 12% larger than the KEO Carbon. To further improve the transfer of power and to longevity of the pedal, this surface area is made of stainless steel moulded directly into the pedal body. .

Lightweight: 130 grams.

With its 130g weight KEO 2 Max is one of the lightest pedals in its category. This is possible thanks to the use of injected carbon and composite materials, which reduce weight while maintains durability.

Reliablility.

Particular attention was focused on reliability and provided through features such as: a carbon injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last. The new line of KEO 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781). Dual seals increase bearing longevity.

Adjustable Q-Factor.

Thanks to 14mm of threads on the new LOOK axle, the Q-factor may be extended by 2mm with the use of specific washers available separately. Use of these specific washers results in a Q-factor of 55mm versus the original 53mm.

RRP: £72.99 SAVE £8.00!

www.bikepedalstore.com