Introduction:
Six OBD cable adapters to allow additional diagnostic options for Italian cars. Plus OBD2 USB Diagnostic Lead. These include ENGINE, ABS, POWER STEERING, ELECTRIC HOOD and CAN ECU's (CAN with additional ELM [CAN adapter supplied only]).
Specification:
Green Adapter Lead (Multiecuscan Adapter 1) = Engine, ABS, Power Steering, (usually)
Red Adapter Lead (Multiecuscan Adapter 2) = Airbag, (usually)
Yellow Adapter Lead (Multiecuscan Adapter 3) = CAN, (usually)
Purple Adapter Lead (Multiecuscan Adapter 4) =Hood & newer models, (usually)
Blue Adapter Lead (Multiecuscan Adapter 5) = Newer models, (usually)
Grey Adapter Lead (Multiecuscan Adapter 6) = Newer models, (usually)
16 Pin OBD2 USB Diagnostic Lead KKL (VAG)
Pin Configurations:
Green Adapter Lead = Female pin 7 to male pins 1,7,9,12.
Red Adapter Lead = Female pin 7 to male pin 3
Yellow Adapter Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12
Purple Adapter Lead = Female pin 7 to male pins 7,8,11,13
Blue Adapter Lead = Female pin 6 to male pin 3 / Female pin 14 to male pin 11
Grey Adapter Lead = Female pin 6 to male pin 12 / Female pin 14 to male pin 13
Additional Items Required:
An ELM327 diagnostic cable to connect to these adapters.
Software (free or full version).
Other Details:
Cables fully tested on supported model before shipping.
No responsibility can be accepted for any damage caused by the lead.
Some models may require the full version of the software to communicate with some ECUs.