Custom Foot Orthotics Refurbishment Service for 1 (one) pair (Left + Right)  Español? No problemo, envienos mensaje

Renew your custom foot orthotics for a fraction of the price.

This service is for orthotic refurbishment, we refurbish / renew orthotics that has a solid base or plate made of plastic or hard foam base, please see pictures for reference, if your orthopedic insole is very soft and flexible (no rigid parts on it)   then it cannot be refurbished – we may apply only a cover on top made of soft foams or if the insole is almost flat then we can apply any type of cover without removing any part.

We are a generic and custom insole manufacturing company, we sell flat insoles, pre-made arch supports and we can make custom foot orthotics following a prescription form from a podiatrist or a professional foot care provider. Note that custom orthotics are expensive based on doctor’s office visit, evaluation, foot impressions or casting, orthotic fabrication and other services and fees that add up to hundreds of dollars for just a pair of custom foot orthotics.

This service requires you to send us your foot orthotics to the address below with a tracking number if possible(send us a message too), once received we can confirm the type of service, and then you can make the payment. Your refurbished orthotics will be ready to ship back to you within 3-business days after received and payment has been made. If ordering a new extra pair (optional - send note with insoles to prepare invoice with PayPal)  it may take 5 business days, we will notify you with the date of receipt. If you have questions please send mail or contact us using the contact seller button, we will reply as soon as possible. If in doubt about the cost - request invoice. We recommend United States Postal service**. Visit your local Postal Office for proper postage to avoid delays, print out our Easy refurbish form available at our website and send it with your orthotics or just include a note on a piece of paper, if you wish enclose a drawing - template for sizing as explained on our guide for Drawing insoles.

Table of basic refurbishment service and duplicate service (optional)

a)    a)  A new cover will be applied on top of orthotic, nothing will be removed, send a specific note on what type of cover you want, up to ¼” inch thick, consider the toe box room of your intended shoes to wear using the orthotics. There is an Easy Refurbish Form on our website that you can print and send with your orthotics.

b)    b)  A new cover will be applied after removing the old one (if possible), send note what cover would you like to choose, 1/8” neoprene ( similar to spenco), 1/16” or 1/8” or 1/4" thick foam with vinyl., 1/6” or 1/8” or ¼” foams. Or select cover as old or similar to old. Please note if under the cover the orthotic has other padding like heel cushioning pad, metatarsal bar, pockets or other type of special padding, an extra charge of 20.00 will be applied to put similar padding, unless you chose not to restore those components (not recommended), this components will suffer damage when separating / removing the old cover and will be not reused. Some just break apart in the process so cannot be reused nor be glued back.

c)       c) Top cover will be removed, a new cover will be applied plus additional padding similar to the old ones found under the old covers. For example heel cushioning pad, spurs, arch pad, pockets, metarsal pad, etc.

d)     d)  A new similar post will be applied on the bottom of the orthotic after removing the old one. This is recommended only when the old post is compressed, has lose the original shape or the original degrees have been compromised due to normal wear and use of the orthotics, If the bottom extrinsic post are in good or great shape, there is no need to replace them.

e)      e) A new bottom arch fill made of soft foam or similar to the old one will be applied after removing the old one. The purpose of and arch fill under the main base is to provide some more support and at the same time keep some flexibility depending on the hardness of the material used, If the bottom fill looks in bad shape then it might be a good idea to replace it.

f)      f)  A whole restoration will be done except main base or plate, choose this option if you are not sure about the components of your orthotics, let us restore it to a similar like new condition with similar materials,  padding and covers , and bottom components if needed. Also you can request and invoice or send pictures before ordering.

g)    g)  A new pair will be produced similar to the one you sent if old orthotic is a short one, also known as met heads or metatarsal length, this orthotic is no longer than where the ball of the foot seats it cover the heel area and arch of the foot. Old pair must be refurbished so we can take measurements and 3D scan the base or plate of the orthotic.

h)      h) A new pair in full length will be made similar to the old one, old pair must be refurbished at the same time to take measurements of the base.

If you have any question or concern, please contact us by message or mail. Vinyl is available only in white and black.

*Disclaimer: If you are experiencing pain, or severe discomfort of your feet, or if you have broken skin or ingrown toenail, bunions, calluses, foot ulcer, please visit your Podiatrist or health care provider to treat your medical condition before ordering our service, you may need a re-evaluation on the use of your current foot orthotics.

**for mailing use United States Postal Service for trouble free shipping to P.O. boxes, write exactly as below ( tape it to the package or use marker).

Legion Orthopedics LLP

Box 451

Bridgeton, NJ 08302

 USA

Thank You for looking!  Check our other listings for flat insoles and premade foot arch supports.

Check out my other items!