|
Model No. |
CJ018
|
|
Operating voltage |
5.0VDC ±0.5V
|
|
Working priceple |
can work with transmitter signal from PT2262 SC2262 EV1527 PT2264 PT2260 |
|
Static current |
≤7 mA (DC 5V)
|
|
Operating frequency |
433MHz
|
|
modulation Mode |
ASK/OOK
|
|
Receiving sensitivity |
over -102 dBm (50 Ω)
|
|
Speed |
< 5 K bps (at 315 MHz, -95 dBm)
|
|
Operating temp. |
-10 °C ~ +60 °C
|
| Max rate | 1 KHZ |
|
Antenns length
|
20 cm (315 MHz), 18 cm (433.92 MHz)
|
|
Dimension |
30*13mm
|
|
Output signal |
4 Channels output , TTL level , Momentary, Latch, Toggle ,user can set it by welding, Latch is defult. |
|
Band width |
2MHz(315MHz, Sensitivity go down 3dBm test )
|
A.singnal Non-locking (Momentary)----connect 1 and 2 ;
B.singnal Self-locking (Toggle) ---- connect 2 and 3 ;
C.singnal Inter-locking (Latch) ---- disconnect all ;
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.
It also mean .Latched only can keep 1 Channel ON .and it will often have 1Channel is ON.