VAG Jacking Point Insert Jack Pads PERMANENTLY FIXED TO YOUR CAR.

3 Sizes available:

VAG1 -With 50mm dia base lifting pad.

VAG2 – With 60mm dia base lifting pad.

VAG3 – With 74mm dia base lifting pad.

All pads are the same price We will send by default the 60mm Pad unless requested via note with order.

Check before purchase that your chassis hole is 30mm dia, that chassis depth (inside) is greater than 25mm and you have sufficient space for the pad diameter i.e 50mm / 60mm / 74mm without obstructions.

These Pads to be used with a flat-topped trolley jack that is greater than the size of the lifting pad.

This listing is for 1 VAG Jacking Point Jack Pad insert:

The Jacking Point Insert Pad is a sturdy rubber Jack Pad with strength rating 95A (tough but flexible) that is presses up into the vacant hole in the chassis providing a long-term solution for safer lifting that you leave in situ–.

A permanent solution for jacking your car providing extra stability and location protecting the underside of the vehicle from metal-to-metal contact. Which could cause scratching, damage to the underseal and hence rusting.

Fits the following vehicles:

Volkswagen New Beetle & Cabrio (1998-2011)
Volkswagen Beetle A5 (2011 on)
Volkswagen Bora (1999-2005)
Volkswagen Caddy Mk3 Typ 2K (2004 – 06/2010)
Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on)
Volkswagen Golf Mk4 1J (1997-2004)
Volkswagen Golf Mk5 1K (2004-2010)
Volkswagen Golf Plus 5M (2004-2010)
Volkswagen Golf Mk6 5K (2009-2012)
Volkswagen Golf Mk7 5G (2012-2020)
Volkswagen Jetta Mk5 1K (2005-2010)
Volkswagen Jetta Mk6 A6 (2011 on)
Volkswagen Passat B6 & B7 Typ3C (2006-2013)
Volkswagen Passat CC 35 (2008-2012)
Volkswagen Scirocco Mk3 (2008 – 2017)
Volkswagen Sharan Mk2 (2010 on)
Volkswagen Tiguan (2007 – 2022)
Volkswagen Touran (2003-2015)
Volkswagen Touran (2017 on)
Volkswagen CC (2012 – 2017)
Volkswagen Eos (2006-2015)

Audi A3/S3 Mk1 8L (1996-2003)
Audi A3/S3/RS3 Mk2 8P (2003-2012)
Audi A3/S3/RS3 Mk3 8V (2013-)
Audi TT Mk1 8N (1999-2006)
Audi TT/S/RS Mk2 8J (2007-2014)
Audi TT Mk3 8S (2014 on)
Audi Q2 (2017 on)
Audi Q3 (2012 – 2018)


Seat Toledo Mk2 1M (1999 – 2004)
Seat Toledo Mk3 5P (2004-2009)
Seat Alhambra Mk2 (2010 on)
Seat Leon Mk1 TYP 1M (1999-2005)
Seat Leon Mk2 1P (2005-2012)
Seat Leon Mk3 5F (2013 on)


Skoda Octavia Mk1 Typ 1U (1996-2004)
Skoda Octavia Mk2 1Z (2004-2012)
Skoda Octavia 5E (2012-2019)
Skoda Yeti 5L (2009-2017)
Skoda Superb B6 (2009-2011)
Skoda Superb 3V (2015 on)

Jack Pad insert Fitting instructions.

1. When fitting a screw driver/ pliers etc may be required to remove underbody plastic covers to expose the existing 30mm chassis hole. ( see video / pictures in advert).

2. If present remove plastic bung this should reveal a 30mm dia hole in the chassis. Fig 1

3. Remove any existing obstruction and place Universal Jacking Pad on top of your flat topped trolley jack aligned with chassis hole. Fig 2

4. Raise the Jacking pad into the hole ensuring alignment. When it starts engaging keep lifting until the top section is fully engaged (i.e you can only now see the base). You may need to turn the jack pad in order for it to fully engage as they are a tight fit. Fig 3

5. Lower the Trolley jack and the Jack pad should now remain in the chassis for future use. Fig 4

 

Note: This instruction should only be used as guides in conjunction with the car manufactures instructions.

 

Important: Check before purchase that your chassis hole is 30mm dia, that chassis depth (inside) is greater than 25mm and you have sufficient space for the pad diameter i.e 50mm / 60mm / 74mm without obstructions.

These Pads to be used with a flat-topped trolley jack that is greater than the size of the pad.

VAG recommend lifting across 4 lift points simultaneously to avoid damage.

Vehicle Fitting Information (Compatibility):
We have included fitting notes in our advert and vehicle specific information but please read these as guidance only, as models and lifting arrangements can vary. Before making any purchase. If you have any further doubt, please feel free to contact us for assistance.

Jacking Pad Tool Jack Pad Adapter Avoid Sill Damage.


Click LINK to view my full range of products.

FEEDBACK:

EBAY ADVICE - ***Before leaving neutral / negative FEEDBACK OR LOW DSR rating , contact your trading partner to try to resolve any issues*****  EBAY ADVICE

If you feel you are unable to give me 5 star positive feedback, please contact me and explain what you are unhappy with, I will try my best to resolve any problems you may have. Please don't judge me by things that are out of my control, like Royal Mail taking longer than expected, when my items are marked dispatched, that is when they are handed over to the post office. - Thank you....:-)

SAFETY NOTE AND SALE TERMS / CONDITIONS:

When jacking a car this should be done on solid level ground, the jack pad should be placed in the centre of the trolley jack head which must larger than the pad and jacked from and too a flat surface. Items purchased will comply with the Sale & Supply of Goods Act 1994 and be of “Satisfactory Quality” unless specified at the time of sale. Improper use could result in injury or damage. we take no liability for damage or injury caused whilst using this item any claim against us are limited to the cost of the item. By accessing our website and/or placing an order, you agree to be bound by these terms & conditions. Title to the goods shall remain with us until paid in full with cleared funds. Full details available on request. Please note our pads may still have the original puck logos from prior to us adding our UK Specific characteristics and specific technical expertise to the product Complies with ‘Made in Britain’ as defined in the Trade Descriptions Act 1968.


For Customers that have already bought from us

 
We strive to deliver 5 -star customer service. If you want to return the item for any reason (such like faulty/item does not match the description/order by mistake etc.). Or you didn’t receive the item.
Please DO NOT select “return this item” or “I didn’t receive it” as it will lower our account rating.
We are very grateful if you can select “contact seller” as the left picture show. After that it
will come up several topic and please select " I have a question about using my item or
I want to send the seller a message
" as the below picture show. It is the fastest way
to receive your message and we will resolve the problem as soon as possible.