-------------------------------------------------------------------------------------------------------------------------------------------------------

This listing suits various FORD RANGER & EVEREST MODELS

(Contact us if your vehicle is not listed as we will most likely have something to suit)

You may have seen similar products on the market, our Power Pedal is unique as it is discreet and very user friendly.

You will have a range of customisation with one single button at your finger tips from the cabin of your vehicle.

The cabin controller has three modes: off, mid and high. These can easily be further fine tuned via the settings within the main module. You can switch between the three modes while driving with a simple push of a button on the small controller without taking your eyes off the road.

Unlike similar products, there aren’t any multiple bright LED lights on the controller that can be distracting, especially at night!

Frequently asked questions:

 

What is it?

The Power Pedal is a digital control module that enhances the response of the engine when the accelerator is pressed.

It plugs inline between the electrical connector on the vehicle’s accelerator pedal and the ECU.

 

What does it do?

The Power Pedal enhances the speed the throttle of the engine operates in relation to the accelerator pedal. It greatly reduces throttle lag and dead spots in the factory accelerator mapping, which means better acceleration and improved drivability for you. 

How does it work?

The main controller on the Power Pedal monitors the amount of throttle in relation to the accelerator pedal. It then adjusts the voltage signal to match the desired result. The Power Pedal has 18 settings you can fine tune so you can get the response you’ve been looking for.

Will it give me more power?

The Power Pedal will give you greater power at certain points in the rev range, you’ll usually notice it most in the low to mid rev range.

However, it won’t increase the total power output of your engine.

How is it installed?

The Power Pedal box simply connects into the plug on your electric accelerator pedal.

It’s up to you where you mount the small cabin controller (Only 35mm x 20mm x 9mm). However, we always recommend plugging it in first and road testing before mounting the controller and arranging the excess cabling. This way you can easily make further adjustments within the main controller to suit your driving style.

 

Can't I just press the pedal harder or faster to get the same result?

Unfortunately not. The accelerator mapping of most modern vehicles is usually slow and unresponsive to allow for many different owners and driving styles. If you have a vehicle with a "sport" button and it feels like it has more performance once pressed then (most of the time) it will only be changing the throttle mapping to make it more responsive.