Red Line Water Wetter Coolant Additive. Rust and Corrosion Protection 355 ml
Trusted eBay Seller
View our feedbackRed Line Water Wetter is one of our most popular products. Its unique additives double the cooling ability of water and improves the heat transfer and reduces cylinder head temperatures.
It has superior heat transfer properties compared to glycol-based anti-freeze which make it perfect for classic and modern racers alike. Water Wetter is compatible with any water cooled engine and is the perfect way to manage those engine temperatures.
Red Line Water Wetter eliminates bubbles or vapor barrier that form on hot metal surfaces and reduces coolant temperatures by up to 20° and gives superior heat transfer properties compared to glycol-based antifreeze.
Another advantages of Water Wetter is that it reduces rust, corrosion and electrolysis, and also cleans and lubricates water pump seals
Please note that this product does not contain any anti freeze and it contains no ethylene glycol. It is compatible with all types of antifreeze and coolant
Sold in 355ml bottles which treats between 13 to 16 litres of coolant
- Unique agent for cooling systems that doubles the cooling ability of water
- Rust and corrosion protection allows for use of straight water in racing or reduced antifreeze levels in warm climates
- Improves heat transfer and reduces cylinder head temperature
- May allow more spark advance for increase power and efficiency
- Use one bottle for most passenger cars and light trucks, treats 3 to 5 gallons or 13.2 to 15.9 liters. Vehicles with larger cooling systems should use two bottles. Small cooling systems should use 1oz (3 to 4 capfuls) per quart
- Compatible with new or used antifreeze (including DEX-COOLTM and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
- Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes
Red Line Water Wetter is sold in 355ml bottles which treats between 13 to 16 litres of water / coolant
Red Line WaterWetter® is designed to provide improved metal wetting and excellent corrosion inhibition when added to plain water or a glycol coolant.
The most poorly maintained system in an automobile is usually the cooling system. Maintenance is quite simple and only required once each year, but most vehicle owners never routinely change the coolant or replenish the corrosion inhibitors which are required for trouble-free operation.
Proper cooling system maintenance is very critical for most modern engines which utilize more aluminium. Aluminium has a very high corrosion potential, even higher than zinc, which is very widely used as a sacrificial anode. The only property which enables aluminium to be used in a cooling system is that it will form protective films under the proper conditions which will prevent the uncontrolled corrosive attack of acids or bases.
Poor aluminium corrosion inhibition will cause the dissolution of aluminium at the heat rejection surfaces, weakening the cooling system walls and water pump casing and weakening the head gasket mating surfaces. These corrosion products will then form deposits on the lower temperature surfaces such as in radiator tubes which have very poor heat transfer properties, causing a significant reduction in the cooling ability of the entire system.
Red Line WaterWetter® will provide the proper corrosion inhibition for all common cooling system metals, including aluminium, cast iron, steel, copper, brass, and lead.
More from Car Service Packs
