Paasche 1/5 HP Airbrush Compressor w/ H Single Action Airbrush

H Single Action – External Mix – Siphon Feed Airbrush:

 

      This single action airbrush features a chrome plated body for durability.  The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. 

 

Includes:

H#3 airbrush, 1 oz bottle assembly, wrench, 6 foot braided air hose and manual 

 

Features:

·      Airbrush Made In The USA

·      The most popular head (.65mm)

·      Highly polished & hardened stainless steel needles for long life and reduced clogging

·      Solvent proof needle packing allow spraying of water & solvent based paints

·      Chrome plated body

 

Specs:

Part Number:    H Airbrush

Type:                Single Action, External mix, Siphon feed

Head Size:       Size 3 (.65mm)

Fluid Packing:  Can spray solvent or water-based fluids

Air Volume:      20 PSI @ .5 CFM

Air Pressure:    20-75 PSI

Air Inlet:            ¼-20 Thread (Paasche thread) – adapters available

Bottle size:       1/4oz to 8oz bottles available

Spray Pattern: 1/32 to 1-1/2

Finish:              Chrome plated body

 

     The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.

The compressor features include:

 

·      1/5 HP piston compressor

·      Regulator & moisture trap

·      Delivers 1-35 PSI depending on airbrush being used

·      Standard Paasche 1/4NPT hose fitting

·      1/8 BPS hose adaptor for competitor hoses

·      Auto shutoff feature

 

​​​​​​​​​​​​​​​​​​​​​            Payment



We accept payment by any of the following methods:


PayPal & Major Credit Cards 


Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!

            Shipping


Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch.


Tracking number will be on the invoice which will be e-mailed.



Returns 


If you are not 100% satisfied with your purchase, you can return the product and get a refund.  You can return a product for up to 30 days from the date you purchased.

​​​​​​​Any product you return must be in the same condition you received it and in the original packaging.   Customer pays return shipping.

H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. Includes: H#3 airbrush, 1 oz bottle assembly, wrench, 6 foot braided air hose and manual Features: · Airbrush Made In The USA · The most popular head (.65mm) · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H Airbrush Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature
Paasche 1/5 HP Airbrush Compressor w/ H Single Action Airbrush

H Single Action – External Mix – Siphon Feed Airbrush:

 

      This single action airbrush features a chrome plated body for durability.  The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. 

 

Includes:

H#3 airbrush, 1 oz bottle assembly, wrench, 6 foot braided air hose and manual 

 

Features:

·      Airbrush Made In The USA

·      The most popular head (.65mm)

·      Highly polished & hardened stainless steel needles for long life and reduced clogging

·      Solvent proof needle packing allow spraying of water & solvent based paints

·      Chrome plated body

 

Specs:

Part Number:    H Airbrush

Type:                Single Action, External mix, Siphon feed

Head Size:       Size 3 (.65mm)

Fluid Packing:  Can spray solvent or water-based fluids

Air Volume:      20 PSI @ .5 CFM

Air Pressure:    20-75 PSI

Air Inlet:            ¼-20 Thread (Paasche thread) – adapters available

Bottle size:       1/4oz to 8oz bottles available

Spray Pattern: 1/32 to 1-1/2

Finish:              Chrome plated body

 

     The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.

The compressor features include:

 

·      1/5 HP piston compressor

·      Regulator & moisture trap

·      Delivers 1-35 PSI depending on airbrush being used

·      Standard Paasche 1/4NPT hose fitting

·      1/8 BPS hose adaptor for competitor hoses

·      Auto shutoff feature

 

Returns 


If you are not 100% satisfied with your purchase, you can return the product and get a refund.  You can return a product for up to 30 days from the date you purchased.

​​​​​​​Any product you return must be in the same condition you received it and in the original packaging.   Customer pays return shipping.

​​​​​​​​​​​​​​​​​​​​​            Payment



We accept payment by any of the following methods:


PayPal & Major Credit Cards 


Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!

            Shipping


Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch.


Tracking number will be on the invoice which will be e-mailed.